Instruction/ maintenance manual of the product RT93SNDHMS Addonics Technologies
Go to page of 8
T echnical Support If you need any assistance to get your unit functioning properly , please have your product information ready and contact Addonics T echnical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www .addonics.com/support/query/ v5.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Removing Cover of RAID T ower IX Loosen the 5 screws at the back of the tower for the cover using a Philips screwdriver . Lift the cover and pull slightly toward the rear of the tower to disengage and remove.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Resetting the RAID Mode NOTE: This procedure destroys all RAID data. It should not harm individual drives or their contents; however , creating or running backups of all data is strongly recommended before proceeding.
Setting or Modifying the RAID Mode NOTE: Setting or modifying the RAID mode destroys all data. 1. Follow the procedure for resetting the RAID Mode. 2. Power down the unit and set the dip switch to the desired RAID Mode. 3. While holding the SET button with a ballpoint pen, turn the unit on.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ RAID Mode Switches M2, M1, M0 (SW1:3 – SW1-5) The RAID Mode switches define what type of RAID will be initialized when the unit is powered up while the RAID Mode button is held down.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ RAID 1 or 10 (Mirror set, Stripe of mirror sets) Number of drives: 2 (RAID 1) or 4 (RAID 10). Unit capacity: size of one member (RAID 1) or size of two members (RAID 10).
CLONE mode works the same way as RAID 1, by maintaining a complete copy of the entire set of data on each drive. LARGE (Spanned set) Number of drives: at least 2 Unit capacity: 100% of all drives together regardless of differences in size Spares: no Fault tolerance: cannot withstand the loss of any drives without losing data.
www .addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www .addonics.com/sales/query/ CONT ACT US.
An important point after buying a device Addonics Technologies RT93SNDHMS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics Technologies RT93SNDHMS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics Technologies RT93SNDHMS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics Technologies RT93SNDHMS you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics Technologies RT93SNDHMS will certainly help you make a decision on the purchase.
If you already are a holder of Addonics Technologies RT93SNDHMS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics Technologies RT93SNDHMS.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics Technologies RT93SNDHMS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics Technologies RT93SNDHMS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
