Instruction/ maintenance manual of the product SL-7 Brinkmann
Go to page of 12
MODEL SL-7 OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS INSTR_821-7000-0_SL7.qxd 5/17/06 4:29 PM Page 1.
HOW YOUR HOME SECURITY MOTION ACTIV A TED LIGHTING SYSTEM WORKS The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone.
P ARTS LIST : Home Security Main Housing Main Housing Mounting Screws (2) Solar Panel Module with Cord Solar Panel Module Mounting Screws (3) SL-7 Owner’ s Manual 2 ASSEMBL Y INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged.
3 Step 3 Slide the two slots in the back of main housing onto the screws. Step 4 Select a location within 15 feet from the main housing to mount the solar panel module. The solar panel module must be mounted where it will receive FULL, DIRECT SUNLIGHT for several hours each day .
4 Step 8 Point the two floodlights in the desired direction. Y ou may want to adjust the floodlights after letting the unit operate for a few nights. Step 9 Position the detector head in the direction you want to cover . Never aim the motion detector head directly at the sun or above a 90° angle (horizontal level).
5 Step 1 After installing your light, leave the switch in the “OFF” position and charge in FULL, DIRECT SUNLIGHT for THREE FULL SUNNY DAYS. Step 2 After allowing the battery to fully charge, the motion detector can be adjusted and tested. Point the motion detector head down 15° from horizontal level.
6 T erminal Wire Connector Changing Batteries 1. Unscrew the four screws in front housing and separate it from rear housing. 2. Carefully peel the tape off the battery , leaving wires attached to tape. 3. Remove the battery from rear housing, being careful not to pull on wires.
7 1. Clean snow and debris off the solar panel so the batter y can recharge. 2. Check and replace batter y periodically throughout the year , especially after winter months. Wintertime Tips Solar security lights can be left outside year round, even in cold weather .
8 Note: After installing the main housing and solar panel module, leave the switch in the “OFF” position and charge in FULL, DIRECT SUNLIGHT for THREE FULL DA YS. Then remove the switch label and slide the switch to the “AUTO” position. The light will turn on automatically at night when it detects motion.
cut along dotted line TEMPLA TE Screw Hole Screw Hole 9 INSTR_821-7000-0_SL7.qxd 5/17/06 4:29 PM Page 10.
10 HOME SECURITY ACCESSORIES For Visa/MasterCard orders, please call 800-468-5252, Monday through Friday , 8:30 AM - 5:00 PM Central Standard Time. 100-0057-0 Replacement Bulb 070-6001-0 SL-7 Replacement Battery 112-0010-0 15 ft. Extension Cord INSTR_821-7000-0_SL7.
For one year from date of purchase, The Brinkmann Corporation warrants the Home Security Motion Activated Lighting System against defects due to workmanship or materials to the original purchaser .
An important point after buying a device Brinkmann SL-7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brinkmann SL-7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brinkmann SL-7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brinkmann SL-7 you will learn all the available features of the product, as well as information on its operation. The information that you get Brinkmann SL-7 will certainly help you make a decision on the purchase.
If you already are a holder of Brinkmann SL-7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brinkmann SL-7.
However, one of the most important roles played by the user manual is to help in solving problems with Brinkmann SL-7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brinkmann SL-7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
