Instruction/ maintenance manual of the product QXD-01 Brinkmann
Go to page of 8
OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS W ARNING READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL TO A VOID PERSONAL INJURY OR PROPER TY DAMAGE.
IMPOR T ANT SAFETY W ARNINGS 1 W ARNING 1 1. This cooker is to be used Outdoors Only . Do not operate indoors (house, tent, garage) or in any unventilated or enclosed area . In windy weather , cooker should be located in an outdoor area that is protected from the wind.
2 6. Propane gas is extremely flammable, follow these instructions: • Use only LP gas cylinders marked "Propane" which are U.S. Department of T ransportation (DOT) certified.
3 ASSEMBL Y INSTRUCTIONS TOOLS REQUIRED T O ASSEMBLE YOUR COOKER: 2 Adjustable wrenches OR Adjustable wrench and the following wrenches: 3/8" Open end wrench 3/4" Open end wrench Step 1 Position the stand upside down as shown. Step 2 Attach wheels using the axle bolts and nuts.
1. Make sure the propane tank valve and needle valves are turned OFF . 2. Make sure male SAE fitting is properly attached to air shutter refer to "Assembly Instructions" . Attach POL fitting to tank using adjustable wrench and tighten by turning COUNTER-CLOCKWISE.
PLACE THE COOKER OUTDOORS ON A HARD, LEVEL, NONCOMBUSTIBLE SURF ACE AW A Y FROM ANY COMBUSTIBLE MA TERIAL. IN WINDY WEA THER, THE COOKER SHOULD BE LOCA TED IN AN OUTDOOR AREA THA T IS PROTECTED FROM THE WIND. GAS LEAK TESTING PROCEDURE MUST BE PERFORMED EVER Y TIME THE COOKER IS USED.
AFTER-USE SAFETY • Always allow the cooker , pot and liquid to cool completely before handling. • Always disconnect the propane tank from cooker when not in use - a safety plug should be placed in the propane tank valve.
140-3895-0 2/01, 9/01 For one year from date of purchase, The Brinkmann Corporation warrants the Outdoor Gas Cooker against defects due to workmanship or materials to the original purchaser .
An important point after buying a device Brinkmann QXD-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brinkmann QXD-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brinkmann QXD-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brinkmann QXD-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Brinkmann QXD-01 will certainly help you make a decision on the purchase.
If you already are a holder of Brinkmann QXD-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brinkmann QXD-01.
However, one of the most important roles played by the user manual is to help in solving problems with Brinkmann QXD-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brinkmann QXD-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
