Instruction/ maintenance manual of the product Q Beam 802-1745-0 Brinkmann
Go to page of 8
OWNER’S MANUAL & OPERA TING INSTRUCTIONS ® 700,000 CANDLEPOWER W ARNING READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL TO A VOID PERSONAL INJURY OR PROPER TY DAMAGE.
.
• Never attempt to wipe or clean the inner reflective surface of the reflector . T ouching or wiping the surface will damage it permanently . • The lens is made of optical-quality , tempered glass. As with all glass, avoid dropping or sharp impact on spotlight.
OPERA TING INSTRUCTIONS READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL BEFORE OPERA TING SPOTLIGHT . Step 1: T o activate spotlight, plug the cigarette lighter adapter into a cigarette lighter receptacle. Step 2: Depress trigger switch in handle to turn spotlight ON.
Step 4: Disconnect bulb wire from connector by holding the connector firmly with fingers then pulling bulb wire straight out as shown in Figure 2. Step 5: Squeeze the wire retainer together and lift up as illustrated in Figure 3. Step 6: Pull bulb straight out from the reflector mounting plate.
4 ACCESSORIES Pigtail Adapters Pigtail adapter with battery terminal clips allow Q-Beam spotlights with cigarette lighter plug to operate directly from a 12-volt battery . (2Ft. Cord) Model 802-1704-0 (10Ft. Cord) Model 802-1705-0 Rechargeable Batter y Pack With Carrying Case 12-volt rechargeable battery pack adds total mobility to your Q-Beam.
5 Replacement Bulb 12-volt, halogen bulb is an original replacement for 700,000 CP spotlight. Model 802-1745-0 Snap-On Lens Filter Filter lens easily snaps-on to Q-Beam spotlight for color and visual effect.
For 1-year from date of purchase, The Brinkmann Corporation warrants the Q-Beam 700,000 CP Spotlight against defects due to workmanship or materials to the original purchaser . The Brinkmann Corporation’ s obligations under this warranty are limited to the following guidelines: • This warranty does not extend to the bulb.
An important point after buying a device Brinkmann Q Beam 802-1745-0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brinkmann Q Beam 802-1745-0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brinkmann Q Beam 802-1745-0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brinkmann Q Beam 802-1745-0 you will learn all the available features of the product, as well as information on its operation. The information that you get Brinkmann Q Beam 802-1745-0 will certainly help you make a decision on the purchase.
If you already are a holder of Brinkmann Q Beam 802-1745-0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brinkmann Q Beam 802-1745-0.
However, one of the most important roles played by the user manual is to help in solving problems with Brinkmann Q Beam 802-1745-0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brinkmann Q Beam 802-1745-0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
