Instruction/ maintenance manual of the product 822-2509-2 Brinkmann
Go to page of 8
WINDOW P ANE P AGODA OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS EXTRA-LONG RUNNING SOLAR POWERED L.E.D. GARDEN ACCENT LIGHTS INSTR_Window Pane-SG.
1 HOW YOUR WINDOW P ANE P AGODA™ SOLAR-POWERED L.E.D. LIGHTS WORK READ AND FOLLOW ALL INSTRUCTIONS CAREFULL Y BEFORE OPERA TING YOUR SOLAR LIGHT . SA VE THIS MANUAL FOR FUTURE REFERENCE.
P ARTS LIST : Window Pane Pagoda Light Head Fixture Ground Stake Adaptor Ground Stake Ground Stake Connector 3-Piece Hanging Hook Ground Stand ASSEMBL Y INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged. 1 3 1 2 3 2 2 Select a location with FULL, DIRECT SUNLIGHT .
Step 1 T o form a hanger for the solar light, connect the hook section with one or two stand sections, depending on the height desired. Step 2 Locate an area of solid ground where you can place your solar lights and insert ground stand. Step or press down on ground stand to aid in driving stand into ground.
Step 1 Attach the ground stake to a pointed connector . Push approximately 3" of the ground stake into the ground. If the ground is too hard, soak area with water to soften. Step 2 Attach light head to ground stake adaptor by inserting tabs on adaptor into slots in bottom of light head.
T op Housing Battery Changing Battery Step 1 Remove lens from top housing by turning lens clockwise. Step 2 With top housing upside down (solar panel facing down), push battery compartment tab and lift off battery compartment lid. Step 3 Remove battery.
6 Solar lights can be left outside year round, even in cold weather . However, if you wish to store your light indoors for more than two or three days, follow these steps to prevent damage to rechargeable batteries: • Store at room temperature in a dry location.
140-2509-0 12/03 Owner’ s Manual for Model 822-2509-2 For 2-years from date of purchase, The Brinkmann Corporation warrants the Window Pane Pagoda solar light against defects due to workmanship or materials to the original purchaser .
An important point after buying a device Brinkmann 822-2509-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brinkmann 822-2509-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brinkmann 822-2509-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brinkmann 822-2509-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Brinkmann 822-2509-2 will certainly help you make a decision on the purchase.
If you already are a holder of Brinkmann 822-2509-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brinkmann 822-2509-2.
However, one of the most important roles played by the user manual is to help in solving problems with Brinkmann 822-2509-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brinkmann 822-2509-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
