Instruction/ maintenance manual of the product R14HPCCES Addonics Technologies
Go to page of 8
www .addonics.com T echnical Support If you need any assistance to get your unit functioning properly , please have your product information ready and contact Addonics T echnical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www .
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Unpacking and Overview W ARNING: Please remember to set the power supply to your local outlet voltage prior to plugging in the power cord.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Cipher Chain Module The Cipher hardware in the R14CCES is activated by either powering up the unit or pressing the Cipher Reset button with the Cipher Key inserted.
Installation (RAID) The Cipher hardware prevents the use of software to configure or manage the Port Multiplier . Configuring a RAID mode must be done using the dipswitches and SET button on the port multiplier itself, located inside the unit at the rear of the chassis.
JBOD Mode (Individual Drives) Number of drives: at least 1 Unit capacity: N/A (100% of each individual drive) Spares: no Fault tolerance: none JBOD mode offers all connected units to the host adapter , no RAID is defined at all. NOTE: JBOD mode is not supported on the R14HPCCES.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ RAID 5 (Stripe set with striped parity) Number of drives: at least 3 Unit capacity: size of one member times number of members minus one.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Configuring the Port Multiplier Using Dipswitches Resetting the RAID NOTE: This procedure destroys all RAID data.
www .addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www .addonics.com/sales/query/ CONT ACT US RAID Mode Switches M2, M1, M0 (SW1:3 – SW1-5) The RAID Mode switches define what type of RAID will be initialized when the unit is powered up while the RAID Mode button is held down, as follows: NOTES: 1.
An important point after buying a device Addonics Technologies R14HPCCES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics Technologies R14HPCCES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics Technologies R14HPCCES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics Technologies R14HPCCES you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics Technologies R14HPCCES will certainly help you make a decision on the purchase.
If you already are a holder of Addonics Technologies R14HPCCES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics Technologies R14HPCCES.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics Technologies R14HPCCES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics Technologies R14HPCCES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
