Instruction/ maintenance manual of the product 822-2500-2 Brinkmann
Go to page of 8
MINI POST LIGHT™ OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS EXTRA-LONG RUNNING SOLAR POWERED ACCENT LIGHTS INSTR-minipost-stake.qxd 1/8/04 3:16 PM Page 1.
1 HOW YOUR MINI POST LIGHT™ SOLAR-POWERED L.E.D. LIGHTS WORK READ AND FOLLOW ALL INSTRUCTIONS CAREFULL Y BEFORE OPERATING YOUR SOLAR LIGHT . SA VE THIS MANUAL FOR FUTURE REFERENCE.
P ARTS LIST : Mini Post Light Head Fixture Ground Stake Connector w/Point ASSEMBL Y INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged. 1 3 1 2 3 2 2 Select a location with FULL, DIRECT SUNLIGHT . Shady locations will not allow the battery to charge fully and will reduce the hours of nighttime light.
Step 1 Attach the ground stake to a pointed connector . Push approximately 3" of the ground stake into the ground. NOTE: Ground can be softened by soaking area with water first. Step 2 Insert light head into ground stake. The photocell light sensor should point away from other nighttime light sources.
4 T op Housing Battery Battery Compartment Lid Lens T op Housing Ta b s IMPORT ANT : The EPA Certified RBRC ® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery contained in our product ind.
Solar lights can be left outside year round, even in cold weather . However , if you wish to store your light indoors for more than two or three days, follow these steps to prevent damage to rechargeable batteries: • Store at room temperature in a dry location.
6 • Clean snow and debris off the solar panel to allow battery to recharge. • Check and replace battery periodically throughout the year , especially after winter months.
140-2500-2 12/03 Owner’ s Manual for Model 822-2500-2 For 1-year from date of purchase, The Brinkmann Corporation warrants the Mini Post Light solar light against defects due to workmanship or materials to the original purchaser .
An important point after buying a device Brinkmann 822-2500-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brinkmann 822-2500-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brinkmann 822-2500-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brinkmann 822-2500-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Brinkmann 822-2500-2 will certainly help you make a decision on the purchase.
If you already are a holder of Brinkmann 822-2500-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brinkmann 822-2500-2.
However, one of the most important roles played by the user manual is to help in solving problems with Brinkmann 822-2500-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brinkmann 822-2500-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
