Instruction/ maintenance manual of the product DCMR256I Addonics Technologies
Go to page of 4
Addonics T E C H N O L O G I E S Diamond Cipher AES 256-bit Mob ile Rack Model: DCMR256I & DCMR256SC User’s Guide FCC Warning Sta tement This equip ment has been tested and found to comply w ith the limits f or a class B digi tal device pursuant to Part 15 of the FCC rules.
Diamond Cipher key Check to make sure you have the correct version of the Diam ond Cipher k ey. The key should match the label at the back of the drive enclosure. Black label AES-256 stands for Diamond Cipher 256-bit key IMPORTANT There is no back door for the Diamond Cipher encrypted hard drive if the key is lost or stolen.
Step 4 Turn the Diamond enclosure over with the hard drive mounting holes facing up. Use the included flat head screws to secure the hard drive onto the bottom of the enclosure and turn in the screw to the “LOCK” position.
Model: DCMR256SC Power : Using the 4-pin floppy connector of the Y-cable, connect it to the floppy- type power connector on the converter. To provide pow er for the y -cable, connect it to one of your desktop's 4-pin molex cable.
An important point after buying a device Addonics Technologies DCMR256I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics Technologies DCMR256I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics Technologies DCMR256I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics Technologies DCMR256I you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics Technologies DCMR256I will certainly help you make a decision on the purchase.
If you already are a holder of Addonics Technologies DCMR256I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics Technologies DCMR256I.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics Technologies DCMR256I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics Technologies DCMR256I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
