Instruction/ maintenance manual of the product 12K300 Briggs & Stratton
Go to page of 16
Document: - page 1 (Black) Screen angle and frequency: 45.0000, 150.0000 Operating & Maintenance Instructions Model 12K300 Intek E Series for Pump applications covered in this manual FORM NO. 276797-1/06 PRINTED IN U.S.A. Copyright 2006 by Briggs & Stratton Corporation www .
Document: - page 2 (Black) Screen angle and frequency: 45.0000, 150.0000 2 Safety References The safety alert symbol ( ) is used to identify safety information about hazards that can result in personal injury . A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury .
Document: - page 3 (Black) Screen angle and frequency: 45.0000, 150.0000 3 Engine Features 1. Engine Identification Model T ype Code 2. Spark Plug 3 . Oil Fill 4. Oil Drain 5. Stop Switch 6. Star ter Handle 7. Air Cleaner 8. Choke Contr ol 9. Kerosene T ank 10.
Document: - page 4 (Black) Screen angle and frequency: 45.0000, 150.0000 4 Operator Safety Kerosene and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death. WHEN ADDING FUEL Turn engine OFF and let engine cool at least 2 minutes before removing fuel cap.
Document: - page 5 (Black) Screen angle and frequency: 45.0000, 150.0000 5 Allow muf fler , engine cylinder and fins to cool before touching. Remove accumulated combustibles from muffler area and cylinder area.
Document: - page 6 (Black) Screen angle and frequency: 45.0000, 150.0000 6 Oil Recommendation Use a high quality detergent oil classified “For Service SF , SG, SH, SJ” or higher . Do not use special additives. Determine best grade for use by temperature during operation, see chart.
Document: - page 7 (Black) Screen angle and frequency: 45.0000, 150.0000 7 Fuel Recommendation Kerosene Use clean, fresh kerosene. Fr esh kerosene prevent s gum fr om formi ng in the fuel system or on essential carbur etor part s. Pur chase kerosene in quantit y that can be used within 30 days.
Document: - page 8 (Black) Screen angle and frequency: 45.0000, 150.0000 8 Starting Engine 1. Check oil level. 2. Fill kerosene tank with kerosene. 3. Fill petrol tank with petrol per the equipment manufacturer’ s instructions. 4. Move CHOKE to choke position (A).
Document: - page 9 (Black) Screen angle and frequency: 45.0000, 150.0000 9 Operation Do not tip engine or equipment at angle which causes kerosene or petrol to spill. The manufacturer of the equipment on which this engine is installed specifies top speed at which the engine will be operated.
Document: - page 10 (Black) Screen angle and frequency: 45.0000, 150.0000 10 Engine Specifications Operation of this engine is for the application it was intended for . All the components used to build this engine assembly must remain in place for the proper operation of this engine.
Document: - page 11 (Black) Screen angle and frequency: 45.0000, 150.0000 11 Engine Maintenance Regular maintenance will improve the performance and extend the life of the engine. See any Authorized Briggs & Stratton Dealer for service. Use only genuine Briggs & Stratton parts.
Document: - page 12 (Black) Screen angle and frequency: 45.0000, 150.0000 12 Changing Oil Change oil after first 5 to 8 hours of use , then every 50 hours. Change oil every 25 hours when operating the engine under heavy load or in high temperatures. 1.
Document: - page 13 (Black) Screen angle and frequency: 45.0000, 150.0000 13 Cleaning Debris Daily or before every use, clean accumulated debris from engine. Keep linkage, spring and controls clean. Keep area behind and around muffler free of any combustible debris.
Document: - page 14 (Black) Screen angle and frequency: 45.0000, 150.0000 14 Storage Kerosene and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death.
Document: - page 15 (Black) Screen angle and frequency: 45.0000, 150.0000 15 W arranty Effective January 1, 2006 replaces all undated W arranties and all Warranties dated before January 1, 2006.
Document: - page 16 (Black) Screen angle and frequency: 45.0000, 150.0000 16 About Y our Engine W arranty Briggs & Stratton welcomes warranty repair and apologizes to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs.
An important point after buying a device Briggs & Stratton 12K300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Briggs & Stratton 12K300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Briggs & Stratton 12K300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Briggs & Stratton 12K300 you will learn all the available features of the product, as well as information on its operation. The information that you get Briggs & Stratton 12K300 will certainly help you make a decision on the purchase.
If you already are a holder of Briggs & Stratton 12K300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Briggs & Stratton 12K300.
However, one of the most important roles played by the user manual is to help in solving problems with Briggs & Stratton 12K300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Briggs & Stratton 12K300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
