Instruction/ maintenance manual of the product AD5HPMSXA Addonics Technologies
Go to page of 8
T echnical Support If you need any assistance to get your unit functioning properly , please have your product information ready and contact Addonics T echnical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www .addonics.com/support/query/ v5.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ RAID Setting Button Dip Switch SA T A Host Port (Port 5) SA T A Port 2 SA T.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Default factory DIP Switch setting: SW1 – RAID Setting DIP Switch BZS – Error buzzer function EZ – Automatic rebuilding to spare drive (one of the drives on the raid is set as a spare).
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Note: When the default factory RAID setting is used, independent drive conf.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Setting or Modifying the RAID Mode Using the JMicron HW RAID Manager Utility Program: 1. For Windows users, install the JMicron HW RAID Manager located on the SA T A Controller CD.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ e. On the DIP switch, change (M0 to M2) setting to the desired RAID mode using the diagram below . All settings on the diagram shows • Error buzzer function is ENABLED • EZ function is DISABLED.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ f. Press the RAID setting button with a ball point pen. g. While pressing the RAID setting button turn on the system power where the HPM is connected.
Notes on Spare Drives using the Easy RAID Setting (EZ) When EZ function is ENABLED, the auto-rebuilding to spare drive is automatic. The degraded RAID group will start rebuilding automatically by using the existing spare drive.
An important point after buying a device Addonics Technologies AD5HPMSXA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics Technologies AD5HPMSXA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics Technologies AD5HPMSXA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics Technologies AD5HPMSXA you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics Technologies AD5HPMSXA will certainly help you make a decision on the purchase.
If you already are a holder of Addonics Technologies AD5HPMSXA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics Technologies AD5HPMSXA.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics Technologies AD5HPMSXA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics Technologies AD5HPMSXA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
