Instruction/ maintenance manual of the product HKDW-702 Addlogix
Go to page of 10
HD-SD DOWN CONVERTER BOARD HKDW-702 INST ALLA TION MANUAL 1st Edition (Revised 2).
HKDW-702 ! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
1-1 (E) HKDW-702 Section 1 Installation 1-1. HKDW-702 Configuration The HKDW-702 consists of the following: . DC-110A board (1) . Shield plate (1) . Screw P2 x 4 (2) .
1-2 (E) HKDW-702 1-3. Confirming the AT ROM Version Installation of the HKDW-702 requires that the ROM (IC38) on the AT-143 board of the HDW-750 is version 1.32 or higher. Confirm the ROM version before starting installation as follows. 1. Turn on the power of the HDW-750.
1-3 (E) HKDW-702 1-4. Opening and Closing the Inside Panel Opening the Inside Panel n Be sure to turn off the POWER switch, unplug the AC power cord or remove the battery before starting the following procedure to prevent the inside of the unit from damage.
1-4 (E) HKDW-702 1-5. Installing the VIDEO OUT Assembly 1. Remove the inside panel. 2. Remove the two screws (P2 x 4) and remove the CN BOX sub panel. 3. Attach the VIDEO OUT assembly with the two screws (P2 x 4) by routing the coaxial cable through the groove.
1-5 (E) HKDW-702 1-7. Setting the SD VBS SETUP Level Perform the following procedure only when the VBS SETUP level is desired to be set to 7.5%. Switch description 1. Open the inside panel and set the switch S1-1 on the AT-143 board to ON. 2. Turn on the main power.
1-6 (E) HKDW-702 ? 03 O ALL FILE ALL FILE LOAD : EXEC ALL FILE SAVE : EXEC F.ID : ALL PRESET : EXEC STORE ALL PRESET: EXEC CLEAR ALL PRESET: EXEC 3SEC CLR PRESET :? ON → 7. Turn off the main power. 8. Open the inside panel and set the switch S1-1 on the AT-143 board to OFF.
HKDW-702 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or t.
Printed in Japan Sony Corporation 2002. 1 16 B&P Company ©2001 HKDW-702 (UCJ) J, E 3-205-558-03.
An important point after buying a device Addlogix HKDW-702 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addlogix HKDW-702 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addlogix HKDW-702 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addlogix HKDW-702 you will learn all the available features of the product, as well as information on its operation. The information that you get Addlogix HKDW-702 will certainly help you make a decision on the purchase.
If you already are a holder of Addlogix HKDW-702, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addlogix HKDW-702.
However, one of the most important roles played by the user manual is to help in solving problems with Addlogix HKDW-702. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addlogix HKDW-702 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
