Instruction/ maintenance manual of the product SV2 Adder Technology
Go to page of 34
SMAR T V V i i e e w w I N S T A L L A T I O N & U S E www .addertec.com SMAR T Vie w 2 SV2 SMAR T Vie w 4 SV4 SMAR T V V i i e e w w.
SmartView Installation and Use Page 1 About this manual SmartView - Installation and Use Sixth edition (April 1999) Part No. ADD0026/6 (c) 1999 Adder Technology Ltd. All rights reserved. Whilst every precaution has been taken in the preparation of this manual, Adder Technology Ltd assumes no responsibility for errors or omissions.
SmartView Installation and Use Page 2 Radio Frequency Energy Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
SmartView Installation and Use Page 3 Contents 1. Introduction ..................................................................................... 5 1.1 Key features ...................................................................................
SmartView Installation and Use Page 4 4. SmartView configuration options ................................................. 21 4.1 Screen saver time delay ........................................................................ 21 4.2 Display options .
SmartView Installation and Use Page 5 1. Introduction Thank you for purchasing the Adder SmartView. Your SmartView is a high performance keyboard, monitor and mouse sharing device which supports a wide range of PC hardware and software platforms. 1.1 Key features Control multiple PCs from a single keyboard, monitor and mouse.
SmartView Installation and Use Page 6 1.2 Package contents SmartView. Power s upply suitable for your country. This installation guide. 1.3 Product information Fig.
SmartView Installation and Use Page 7 Fig. 1 (b). SmartView (SV2 version supporting 2 PCs) Fig. 1 (c) - Remote control pad / display (optional accessory for 4 port models).
SmartView Installation and Use Page 8 2. Installation 2.1 What you will need Cables to connect the SmartView to each of your PC keyboard, video and mouse ports. Cable specifications are given in appendix A. (You do not need to connect a mouse cable if you are not using the mouse).
SmartView Installation and Use Page 9 Use of PS/2 and RS232 style mice with the SmartView - All of the mouse connections from SmartView to PCs support either a PS/2 or an RS232 mouse. SmartView automatically converts from the PS/2 mouse commands to RS232 serial mouse commands.
SmartView Installation and Use Page 10 the monitor and each of the computers in turn. Failure to switch the SmartView and computers on in the correct order can lead to the mouse and/or keyboard not being recognised by the computers when they are switched on.
SmartView Installation and Use Page 11 In configure mode, options are entered by typing a letter followed by a number followed by (enter). Use ESC to abort the entry of an option. The SmartView will remain in configure mode until you type 'E' (enter).
SmartView Installation and Use Page 12 T1 - 2 seconds autoscan delay time before switching to next port (default) T2 - 5 seconds autoscan delay time before switching to next port T3 - 7 seconds autosc.
SmartView Installation and Use Page 13 P - Sets password - see section 4.7 for instructions. E - Exits configure mode and returns the SmartView to normal operation mode.
SmartView Installation and Use Page 14 With the PS/2 mouse disconnected, change the channel using the keypad or keyboard hotkeys. The SmartView detects that the mouse has been disconnected and triggers the automatic recovery system. Plug in the PS/2 mouse and the SmartView will re-initialise it.
SmartView Installation and Use Page 15 Type of mouse / system Driver ty pe Likely expected Suggested Connected at bootup data format restoration PS/2 PS/2 only PS/2 F5 PS/2 IntelliMouse PS/2 F5 Intell.
SmartView Installation and Use Page 16 3. Using the SmartView This section explains the general operation of the SmartView. We recommend that you read this section before starting to use the product. 3.1 Power on status At power on the SmartView selects PC number 1 and displays '1'.
SmartView Installation and Use Page 17 3.4 Keyboard hotkey control SmartView can be conveniently controlled by selecting channel, autoscan mode or security locking from the keyboard. All of the hotkey control commands are invoked by holding down the two hotkeys and then pressing a command key.
SmartView Installation and Use Page 18 channels (see section 4.9) then only the active channels will be selected. Otherwise the SmartView will cycle through all channels when using HOTKEYs + TAB.
SmartView Installation and Use Page 19 To 'tab through' channels: press ba ba v v release v press v v release v press v v release vba 3.5 Mouse control The channels can conveniently be changed on ADDERview by using a three button mouse.
SmartView Installation and Use Page 20 data booster and can each be up to 30 metres away from the next SmartView. The channel can be selected on remote SmartView units using an extension of the HOTKEY control function. For example, consider a situation where two SmartView 4 port units are connected together as shown below.
SmartView Installation and Use Page 21 4. SmartView configuration options All the options described in this section are entered in SmartView configure mode - see section 2.
SmartView Installation and Use Page 22 D1 - Display dot flashes to indicate activity, right handed auxiliary display (default) D2 - Display dot does not flash, right handed auxiliary display D3 - Disp.
SmartView Installation and Use Page 23 Many modern monitors are fitted with automatic power save relays and will switch off after a few seconds if connected to an inactive PC. If you are using such a monitor you must not use the L2 feature. Constant switching on and off of your monitor's relay will eventually damage your monitor.
SmartView Installation and Use Page 24 U1 - SmartView channels are switchable using a 3 button mouse or IntelliMouse (default) (SmartView reports 2 button mouse mode to PCs) U2 - SmartView channels ar.
SmartView Installation and Use Page 25 4.6 Firmware functions (version query, mouse restore and reset) For technical support purposes, it may be necessary to find the firmware release version for the control software in your SmartView. For example, if the release version is v1.
SmartView Installation and Use Page 26 keyboard (except ctrl, alt, shift and enter). Consequently the following 'password' would be valid: oFRED g g 4.8 Cascade query code The SmartViews use a special ‘query code’ to detect whether or not they are connected to another SmartView.
SmartView Installation and Use Page 27 Appendix A. Cable and connector specifications IMPORTANT NOTE The maximum cable lengths supported vary widely between devices and cables. It may be possible to use cables that are longer than those specified below with certain PCs and peripherals but this cannot be guaranteed.
SmartView Installation and Use Page 28 RS232 serial mice - these require a special converter to connect the RS232 lines present on the SmartView mouse ports to the RS232 port on a PC. The wiring is identical to that used by Microsoft for their autosensing mouse adapter and is shown below: Cables should be no longer than 30 metres.
SmartView Installation and Use Page 29 Appendix B. Problem Solving Problem: Poor video quality with smearing fuzziness or ripple. Action: Use screened coaxial video cables to connect your devices to the SmartView. Problem: Mouse does not move cursor on screen.
SmartView Installation and Use Page 30 Problem: Mouse causes channel to change. Action: Some cheaper mice are not fully compatible with the SmartView and can lose data causing the channel to be changed (if mouse switching of channels is enabled).
SmartView Installation and Use Page 31 Notes.
SmartView Installation and Use Page 32 Notes.
SMAR T V V i i e e w w INST ALLA TION & USE ADDER T echnology Limited T echnolog y House T rafalgar W a y Bar Hill Cambridge CB3 8SQ • England T : +44 (0) 1954 780044 F: +44 (0) 1954 780081 sales@addertec .
An important point after buying a device Adder Technology SV2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Adder Technology SV2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Adder Technology SV2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Adder Technology SV2 you will learn all the available features of the product, as well as information on its operation. The information that you get Adder Technology SV2 will certainly help you make a decision on the purchase.
If you already are a holder of Adder Technology SV2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Adder Technology SV2.
However, one of the most important roles played by the user manual is to help in solving problems with Adder Technology SV2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Adder Technology SV2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
