Instruction/ maintenance manual of the product CP-11t BOXLIGHT
Go to page of 38
USER’S GUIDE BO XLIGHT CP-11t.
2 INFORMA TION T O THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning.
4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 14 COMPUTER MODE 22 VIDEO MODE 29 SETTING 31 APPENDIX 32 PREP ARA TION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 P.
5 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
6 PREP ARA TION NAME OF EA CH P AR T OF THE PR OJECT OR These Air Intake Vents should not be blocked. BO TT OM OF THE CABINET B A CK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, following attention should be taken.
7 PREP ARA TION POSITIONING THE PR OJECT OR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 4.6’(1.4m) ~ 35.4’(10.8m). ● Refer to the figure below to adjust the screen size. Screen Size (W x H) mm Height (H1) 30” Height (H2) 610 x 457 17.
8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least 3’(1m) away from any object. ● Keep sides clear of any obstructions. Obstructions may block cooling air. This projector is equipped with cooling fans for protection from overheating.
9 PREP ARA TION MO VING THE PR OJECT OR Use the Carry Handle when moving the Projector. When moving the projector, replace the lens cover and retract feet to prevent damage to the lens and cabinet.
10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output to this terminal. (Refer to P12, 13.) When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal.
11 CONNECTING THE PR OJECT OR CONNECTING T O THE VIDEO EQUIPMENT S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Video Source (example) Video Cassette Recorder Video.
12 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTING T O THE COMPUTER To connect to the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA) VG.
13 CONNECTING THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL POR T COMPUTER IN MONIT OR OUT 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON.
14 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTROL V OLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL LOCK Used to select COMPUTER output source. (P22) Used to select VIDEO source. (P29) Used to execute the item selected or to expand the image in DIGITAL ZOOM mode.
15 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL LOCK To insure safe operation, please observe the following precautions : ● Use (2) AA type alkaline batteries. ● Replace two batteries at the same time.
ZOOM FOCUS V OLUME MENU MODE SELECT AU TO IM AG E NORMAL ON – OFF LAMP READ Y W ARNING TEMP . LAMP REPLA CE 16 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to select zoom adjust.
17 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears.
18 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P22) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P26) PC ADJUST MENU Used to adjust the parameters to match with the input signal format.
19 B ASIC OPERA TION TURNING ON THE PR OJECT OR Connect the projector's AC power cord into a wall outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON.
20 B ASIC OPERA TION ADJUSTING THE IMA GE The message disappears after 4 seconds. The message disappears after 4 seconds. KEYST ONE ADJUSTMENT 1 Press the KEYSTONE ▲ / ▼ button on the Remote Control Unit or select the Keystone on the SCREEN menu. (Refer to page 28, 29.
21 B ASIC OPERA TION Press the VOLUME (+/ – ) button(s) on the Top Control or on the Remote Control Unit to adjust the volume. The Volume dialog box appears on the screen for a few seconds. The VOLUME (+) button increases the volume, and the VOLUME ( – ) button decreases the volume.
MODE button 22 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE MENU OPERA TION When selecting the Computer Mode, the Current Mode display appears.
23 COMPUTER MODE Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 135 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq.
24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector.
The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total lines Recalls the parameter data that was previously adjusted. Reset Stores the parameters in the memory. Stored Clears the parameter data previously set.
26 COMPUTER MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
27 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button.
28 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button.
29 MODE button VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE DIRECT OPERA TION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit.
30 VIDEO MODE PICTURE IMA GE ADJUSTMENT Each of the keys operates as follow. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear.
31 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
32 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation.
33 APPENDIX CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When the projector is not in use, replace the lens cover.
34 APPENDIX LAMP REPLA CEMENT INDICA T OR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required.
35 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13.
36 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Remote Control Unit does not work. ● Check the batteries. ● Check the ALL-OFF switch on the Remote Control Unit is set to “ ON. ” . ● Make sure nothing is between the Remote Receiver and the Remote Control Unit.
37 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 8.6 lbs (3.9 kg) 9.41" x 3.54" x 12.72" (239mm x 90mm x 323mm) (not including Adjustable Feet) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.
LIMITED W ARRANTY BOXLIGHT CORPORATION ( “ BOXLIGHT ” ) warrants that each Boxlight CP-11t ( “ the Product ” ) sold hereunder will conform to and function in accordance with the written specifications of BOXLIGHT.
An important point after buying a device BOXLIGHT CP-11t (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BOXLIGHT CP-11t yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BOXLIGHT CP-11t - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BOXLIGHT CP-11t you will learn all the available features of the product, as well as information on its operation. The information that you get BOXLIGHT CP-11t will certainly help you make a decision on the purchase.
If you already are a holder of BOXLIGHT CP-11t, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BOXLIGHT CP-11t.
However, one of the most important roles played by the user manual is to help in solving problems with BOXLIGHT CP-11t. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BOXLIGHT CP-11t along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
