Instruction/ maintenance manual of the product BWL-0410 Bowens
Go to page of 10
ESPRIT GEMINI DIGIT AL USER GUIDE BWL-0410 (10/06) BOWENS INTERNA TIONAL LIMITED 355 Old Road Clacton On Sea Essex CO15 3RH T el: +44 (0)1255 422807 Fax: +44 (0)1255 436342 www .bowens.co.uk ʻBowensʼ ® and ʻthe power behind the pictureʼ ® are registered trademarks of Bowens International Ltd.
www .bowens.co.uk 2 Description Page Introduction and Safety Notes 3 Control Panel Guide 4 Connecting & Using the Esprit Gemini 5 Mounting 5 Fitting the Modelling Lamp 6 Fitting / Removing Reflect.
4 Control Panel Guide Rear Control Panel Side Control Panel www .bowens.co.uk www .bowens.co.uk Connecting & Using the Esprit Gemini Digital 5 The Esprit Gemini Digital unit may be operated either on a mains supply or with a Bowens battery source such as the Bowens T ravel-Pak, T urbo-Pak or the Explorer 1500.
www .bowens.co.uk 7 www .bowens.co.uk 6 Fitting the Modelling Lamp Switch off and disconnect from the supply . Screw modelling lamp into ES lampholder in the centre of the reflector . Allow lamp to cool before removing. Note: It is recommended that a Photoflood or Halostar bulb with a maximum wattage of 275W is used.
Function Display Description *Lamp LP Off (OFF) - Lamp remains ʻof f ʼ during operation. USER (USR) - In ʻuser ʼ mode the modelling lamp can be adjusted from f5.0 to f10.0 Proportional (PRO) - In ʻproportionalʼ mode the modelling lamp will automatically adjust itself to the same output level as the flash.
Advanced Functions www .bowens.co.uk 11 Functions Menu System www .bowens.co.uk 10 Function Display Description Audio (Key Clicks & W arnings) AUD Off (OFF) - All audible beeps/clicks are turned off during normal operation i.e. while scrolling through the functions menu.
Modelling Lamp Ready Indicator The modelling lamp can be used as an indicator of when the unit has flashed, and also when it has charged and is ready to fire again. All modelling lamp options are only available when the unit is operating from mains power .
The Esprit Gemini Digital is great studio monolight, but what about if you need to work out on location? Thanks to Bowens handy battery packs, your Bowens Esprit Gemini Digital units can leave the studio to go on location anytime, anywhere. Included in Bowens range of battery packs are the T ravel-Pak and the larger T ravel-Pak+.
Pulsar Clip-On Platform With The Pulsar clip-on platform is a handy way of attaching your radio trigger units to almost anything around your studio or even whilst out on location. Simply attach your loose Pulsar unit to the platform and clip onto whatever you need to.
www .bowens.co.uk 19 www .bowens.co.uk 18 Specifications Specifications Part Number (230V) (1 17V) Stored Energy (max) Sync V oltage Flash Colour T emperature Circuit Protection Flash Power Control Mo.
An important point after buying a device Bowens BWL-0410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bowens BWL-0410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bowens BWL-0410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bowens BWL-0410 you will learn all the available features of the product, as well as information on its operation. The information that you get Bowens BWL-0410 will certainly help you make a decision on the purchase.
If you already are a holder of Bowens BWL-0410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bowens BWL-0410.
However, one of the most important roles played by the user manual is to help in solving problems with Bowens BWL-0410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bowens BWL-0410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
