Instruction/ maintenance manual of the product RDS735UA Boss Audio Systems
Go to page of 19
.
1 1. BUT TONS L OCA TION AND FUNCTIONS 1. Panel Release Button 2. Mute Button 3. CD Eject Button 4. Audio Button 5. Display Button / ID3 Information Button 6. Local / Distant Button 7. Preset Memory Buttons 8. Mono / Stereo Button 9. Scan Button 10. Volume Knob 11.
2. HANDLING COMP ACT DISC S MOISTURE CONDENSA TION NOTES ON CDs P. 2 P. 3 P. 4 P. 1 P. 5 P. 6 P. 7 1. 2. 3. 4. 5. NOTES ON DISCS There are paste residue. Ink is sticky (P .5). Stickers that are beginning to peel away , leaving a sticky residue (P .6).
3. INST ALLA TION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly . Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.
4. DET ACHABLE CONTROL P ANEL (D .C.P .) Removing The Detachable Control Panel (D.C.P .). 1. T urn the power off 2. Press the D .C.P . release button 3. Remove the D .C.P . P ANEL RELEASE BUTTON B A 2 Attaching the DCP CAUTION 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D .
6 5. WIRING DIAGRAM (20 PIN HARNESS PLUG) GREY/GRAU/GRIS/CINZA/GRIS/GRIGIO GREY -BLACK/GRAU-SCHWARZ/GRIS-NOIR/CINZA-PRETO /GRIS-NEGRO/GRIGIO-NERO VIOLET/VIOLETT/VIOLET/VIOLETA/VIOLETA/VIOLA VIOLET -BL.
16) SOURCE BUTTON (SOURCE) Press this button to remove the control panel. 6. BASIC OPERA TIONS 1) P ANEL RELEASE BUTTON (REL) 12) POWER ON/OFF BUTTON 5) DISPLA Y BUTTON (DISP) Press this button to turn on or o f f th e power . Press this button briefly , the LCD will display the clock for about 2 seconds, then return to previous display mode.
7. AUDIO OPERA TIONS 4) AUDIO BUTTON Press this button to select desired audio function. While the selected function is displayed, turn V olume Knob to adjust the level within 5 seconds, otherwise the unit will return to volume adjustment mode. 2) MUTE BUTTON (MUTE) Press this button to mute the sound.
8. RADIO OPERA TIONS 11) AUTO MEMORY STORE/PRESET SCAN BUTTON (AS/PS) 1. PRESET SCAN: Press AS/PS button briefly to enter Preset Scan mode, it will scan all the preset stations in the memories, you can hear that it will stay on each station for about 5 seconds.
9.CD OPERA TIONS EJECT BUTTON M1) P AUSE BUTTON (P AUSE) Press this button to pause CD play , press again to release pause. M2) SCAN BUTTON (SCAN) Press this button, the first 10 seconds of each track will be played sequentially until this button is pressed again, then normal play will resume at the current track.
11 10. USB DRIVE OPERA TIONS ST ART THE USB DEVICE MODE 2. A 0.5mm USB cable is included with this unit. Please connect the USB drive /device to the unit thru the USB cable as indicated in picture and the display will show “USB PLA Y”.........the download has begun.
11 . SD/MMC OPERA TIONS 1. Press panel release button to release the front panel. (P .1) 2. The SD/MMC card slot is located on the unit as indicated in (P .2). 3. Insert the SD/MMC card into the card slot in the correct direction until a “CLICK” sound is heard.
13 Notes : L OADING DISC NAVIGA TING THROUGH AND TRACKS DIRECTORIES Insert the CD as usual, if it is an MP3 CD , the display will show “MP3 T01” then the message “READING” will appear , when disc scanning completed, the first track on the first d will play .
(2) SEARCH / TRACK NAME B Y USING VOLUME KNOB Under MP3 Play Mode, press MP3 MENU BUTTON twice, the display shows “ * “. Rotate the VOL UME KNOB for selecting the character . In this Encoder Search mode, SELECT button use as move cursor . Press BAND/L OUDNES S button use as MP3 CONFIRM BUT TON.
15 13 . REMOTE CONTROL OPERA TIONS: 2. V olume Up/Down 1. Power 9. Audio Key 6. LOC () 7. Scan 5. T uning Up/Down 8. Mute Radio Mode Power On/Off Select Vol, Bas, T re, Fad, Bal Adjust Vol,Bas, T re,F.
16 14. SPECIFICA TIONS Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio 87.5-107.9MHz U.S. 87.5-108MHz EURO 10.7 MHz Better than 15dB at S/N 30 dB 25 dB at 1KHz 50.
15. TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer .
4 10 R - 02 0 896.
An important point after buying a device Boss Audio Systems RDS735UA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Boss Audio Systems RDS735UA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Boss Audio Systems RDS735UA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Boss Audio Systems RDS735UA you will learn all the available features of the product, as well as information on its operation. The information that you get Boss Audio Systems RDS735UA will certainly help you make a decision on the purchase.
If you already are a holder of Boss Audio Systems RDS735UA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Boss Audio Systems RDS735UA.
However, one of the most important roles played by the user manual is to help in solving problems with Boss Audio Systems RDS735UA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Boss Audio Systems RDS735UA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
