Instruction/ maintenance manual of the product RC50 Boss Audio Systems
Go to page of 12
RC-50 Loop Station © 2006 BOSS Corpora tion U.S. All rights reserved. No part of this publication may be r eproduced in any f orm without the written permission of BOSS Corpor ation U .
About the RC-50 Workshop Series The BOSS RC-50 Loop Station sets a new standard for per formance loopers. With 49 minutes of mono recording time (or 24 minutes in stereo), onboard storage for up to 297 phrases, and massive realtime control, the RC-50 is a powerful realtime performance tool.
About the Guide The RC-50’ s built-in guide provides a rhythmic back ing for you to play with while y ou’ re r ecording and playing phrases. The guide offers many different patterns in various time signatures and musical styles, with high- quality audio using sampled drum and percussion sounds.
T ur n the P A TCH/V AL UE dial to the desired value. When you’ re finished, press EXIT . The lights on the T AP TEMPO button and TEMPO pedal flash in different colors along with the patch tempo, with red indicating the first beat— or “ downbeat”— of each measure, and green indicating all other beats.
5 Guide:Play Count —When Guide:Play Count is set to 1MEAS, a one - measure count-in plays prior to playback when phrase playback is started with the REC/PLA Y/OVERDUB pedal. ( The OFF setting disables the c ount-in.) The count-in lev el is determined by the GUIDE LEVEL knob.
The Benefit of Loop Quantize T o better understand how Loop Quantize aids in phrase recording, let’ s take a look at how one typically records phrases on the RC-50. When the guide ’ s off and you ’ re recording a Single mode phr ase, y ou usually have one pr imary concern: closing the phrase so it loops smoothly .
There ’ s no on/off switch for Loop Quantiz e—it ’ s aut omatically enabled when you ’ re recording to one of the follo wing references: The guide. A phrase whose T empo Sync switch is on. The phrase that determines Loop Sync playback length.
When the phrase is closed with the REC/PLA Y/OVERDUB pedal, Loop Quantize adjusts the phrase ending to the nearest adjustment point at the time the pedal is pressed (in our example, any second beat of one of the refer ence ’ s measures).
When you decide to close the phrase, press REC/PLA Y/OVERDUB again. Loop Q uantize automatically adjusts the phrase’ s ending to the guide measure downbeat that ’ s nearest when the pedal is pressed.
0 When you’re in Single mode and the patch’ s P hrase Change mode is set to LOOP END, selecting a phrase for recording while another is playing puts it in a record standby state, and recording doesn’t actually begin until the current phrase ends.
Here’ s an important thing to keep in mind: T urning on a phrase’ s T empo Sync switch will make it play at the current patch tempo. If you don’t want its playback speed changed from the .
Phrase 1 Loop Sync pla yback Phrase 2 Phrase 3 Silence CCC CC.
An important point after buying a device Boss Audio Systems RC50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Boss Audio Systems RC50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Boss Audio Systems RC50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Boss Audio Systems RC50 you will learn all the available features of the product, as well as information on its operation. The information that you get Boss Audio Systems RC50 will certainly help you make a decision on the purchase.
If you already are a holder of Boss Audio Systems RC50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Boss Audio Systems RC50.
However, one of the most important roles played by the user manual is to help in solving problems with Boss Audio Systems RC50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Boss Audio Systems RC50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
