Instruction/ maintenance manual of the product Boss RV-5 Boss Audio Systems
Go to page of 20
Owner ’ s Manual DC AC AC & BATTERY POWERED FET RV-5_e.book 1 ページ ２００２年７月２３日 火曜日 午後５時３２分.
2 Thank you, and congratulations on your choice of BOSS RV-5 Digital Reverb. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information con- cerning the proper operation of the unit.
3 Features ● This high-quality, multifunction digital reverb gives you the quality of a studio effect, but condensed into a compact pedal. ● Models the sound of the spring reverb from Accutronics, a name synonymous with spring reverb.
4 Panel Description fig.01 1. AC Adaptor Jack Accepts connection of an AC Adaptor (op- tionally available BOSS PSA-Series). By us- ing an AC Adaptor, you can play without being concerned about how much battery power you have left. * As soon as you connect the AC adaptor, the unit is turned on.
5 Panel Description 2. CHECK Indicator This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator. The indicator lights when an effect is ON. * If this indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately.
6 Panel Description 5. Pedal Switch Used for switching effects on/off, and for in- putting the tempo. 6. Thumbscrew When this screw is loosened, the pedal will open, allowing you to change the battery. * For instructions on changing the battery, refer to “Changing the Battery” (p.
7 Panel Description 8. TONE Knob This adjusts the tone of the reverb sound. The more you turn the knob to the right (clockwise) of center (standard), the brighter the sound becomes; turn the knob to the left of center to create a sound with greater warmth.
8 Connections fig.03 AC adaptor BOSS PSA-series (option) Electric Guitar Guitar Amplifier OUT DC 9V/200mA Keyboard * Be sure to lower the output level of any device being connected.
9 Connections * When running the unit on battery power, inserting a plug into the INPUT-A (MONO) or INPUT-B Jack will automatically switch the unit on. * The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.
10 Operating the Unit fig.05 1. When you have made the necessary con- nections (p. 8), depress the pedal switch to turn the effect on. (the CHECK indica- tor turns red.) * The unit’s functions differ according to how it is connected. Refer to “Outputting Only the Effect” (p.
11 Outputting Only the Effect By plugging into INPUT-B, you can have only the effect sound be output (the direct sound is not output). * When the effect is off, the output from OUTPUT-A and OUTPUT-B is muted. Guitar Amplifier Mixer RETURN RETURN SEND SEND * Make sure the input/output levels of devices being connected are matched appropriately.
12 Changing the Battery When the indicator goes dim or no longer lights while an effect is on, it means that the battery is nearly dead and must be replaced. Replace the battery following the steps below. * The use of an AC adaptor is recommended as the unit’s power consumption is relatively high.
13 Troubleshooting Power won’t come on / CHECK indicator doesn’t light: ● Is the specified adaptor (PSA-series; sold separately) properly connected? Check the connection once more (p. 8). * Never use any AC adapter other than one specified for use with the RV-5.
14 Troubleshooting No sound / Low volume: ● Is the RV-5 properly connected to your instrument? Check the connection once more (p. 8). ● Is the volume turned down on any guitar amp or effects device you have connect- ed? Check the settings of the connected device.
15 Setting Samples Spring Reverb You can derive more of the spring reverb’s char- acteristic ambience by muting the lower strings. Bright Reverb Concert Hall Deep Reverb RV-5_e.
16 Setting Samples Room Garage Sound Fat Sound Effective when TIME is matched with the phrase’s tempo. This yields an even fatter sound when used in combination with distortion effects. Chorus Effect Adds a sense of greater breadth and depth to ar- peggios played with a clean sound.
17 Specifications RV-5: Digital Reverb Nominal Input Level ...................... -20 dBu Input Impedance ............................. 1 M Ω Nominal Output Level ................... -20 dBu Output Impedance .......................... 1 k Ω Recommended Load Impedance .
18 Specifications Current Draw .................................. 50 mA (DC 9 V) * Expected battery life under continuous use: Carbon: 2 hours, Alkaline: 6 hours These figures will vary depending on the actual conditions of use. Dimensions ...........
This product complies with the requirements of European Directive 89/336/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
G6017360 RV-5_e.book 20 ページ ２００２年７月２３日 火曜日 午後５時３２分.
An important point after buying a device Boss Audio Systems Boss RV-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Boss Audio Systems Boss RV-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Boss Audio Systems Boss RV-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Boss Audio Systems Boss RV-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Boss Audio Systems Boss RV-5 will certainly help you make a decision on the purchase.
If you already are a holder of Boss Audio Systems Boss RV-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Boss Audio Systems Boss RV-5.
However, one of the most important roles played by the user manual is to help in solving problems with Boss Audio Systems Boss RV-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Boss Audio Systems Boss RV-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
