Instruction/ maintenance manual of the product PWS 9-125 CE Bosch
Go to page of 13
* Des idées en action. Bedienungsanleitung Operating instructions Instructions d’emploi Instrucciones de servicio Manual de instruções Istruzioni d’uso Gebruiksaanwijzing Betjeningsvejledning B.
2 • 2 609 000 397 • 04.08 2 605 703 031 1 605 703 099 1 600 210 039 1 603 340 031 2 603 340 018 1 603 340 040 1 607 950 040 2 607 950 037 1 602 025 024 1 601 329 013 1 605 510 281 2 605 730 036 1 .
3 • 2 609 000 397 • 04.08 2 609 000 397.book Seite 1 Donnerstag, 26. August 2004 1:27 13.
4 + 5 • 2 609 000 397 • 04.08 D IAMOND Laser 6 6 9 13 12 16 12 6 14 6 15 3 1 2 5 4 8 7 6 11 10 11 4 10 18 17 8 PWS 9-125 CE 2 609 000 397 - U4+5 Seite 4 Donnerstag, 26.
English - 1 Speed Preselection (Type CE) The machine is intended for cutting, roughing and brushing metal and stone materials without using water. For cutting stone, a cutting guide is re- quired. For machines with electronic control: With ap- proved sanding tools, the machine can be used for sanding and polishing.
English - 2 Measured values determined according to EN 50 144. Typically the A-weighted noise levels of the ma- chine are: Sound pressure level: 88 dB (A); sound power level: 101 dB (A). Wear hearing protection! When using the standard auxiliary handle, the typically weighted maximum acceleration is 5.
English - 3 ■ When performing an operation where the tool insert can run into concealed electric lines, hold the machine by the insulated handles only. Contact with a “ live ” wire will make exposed metal parts of the tool “ live ” and shock the op- erator.
English - 4 ■ Before any work on the machine itself, pull the mains plug. Protection Guard ■ For work with grinding or cutting discs, the pro- tection guard 6 must be mounted. Open the clamping lever 7 . Place the protection guard 6 onto the spindle col- lar of the machine head as shown in the illustra- tion.
English - 5 Grinding- / Cutting Disc Observe the dimensions of the grinding discs. The hole diameter must fit mounting flange 8 (M 14), 19 (M 10). Do not use any re- ducers or adapters.
English - 6 A properly tightened undamaged, quick- clamping nut can be loosened by hand turning the knurled ring by hand in an an- ticlockwise direction. Never loosen a tight quick-clamping nut with pliers but use a two-pin spanner. In- sert the two-pin spanner as shown in the illustration.
English - 7 Flap Disc With the flap disc (accessory), curved surfaces and profiles (contour sanding) can be worked. Flap discs have a considerably higher service life than sanding sheets, lower noise level and lower sanding temperatures. Cutting When cutting, do not press, tilt or oscillate the machine.
English - 8 Recycle raw materials instead of disposing as waste The machine, accessories and packaging should be sorted for environmental-friendly recycling. These instructions are printed on recycled paper manufactured without chlorine. The plastic components are labelled for catego- rised recycling.
Robert Bosch GmbH Geschäftsbereich Elektrowerkzeuge 70745 Leinfelden-Echterdingen www.bosch-pt.com 2 609 000 397 (04.08) O / 113 Printed in Hungary - Imprimé en Hongrie Chlor * Des id é es en action.
An important point after buying a device Bosch PWS 9-125 CE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch PWS 9-125 CE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch PWS 9-125 CE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch PWS 9-125 CE you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch PWS 9-125 CE will certainly help you make a decision on the purchase.
If you already are a holder of Bosch PWS 9-125 CE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch PWS 9-125 CE.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch PWS 9-125 CE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch PWS 9-125 CE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
