Instruction/ maintenance manual of the product 18/02/E Bosch Power Tools
Go to page of 12
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen www.bosch-pt.com 1 619 929 736 (2007.08) T / 119 GBH Professional 2-18 E | 2-18 RE de Originalbetriebsanleitung en Original instruc.
3 | 1 619 929 736 | (30.8.07) Bosch Power Tools X 10 9 1 8 11 10 14 13 12 13 3 3 F E D C B A OBJ_BUCH-427-001.book Page 3 Th ursday, August 30 , 2007 4:35 PM.
1 619 929 736 | (30.8.07) Bosch Power Tools 4 | X 16 17 18 19 20 10 8 15 6 21 3 J I H G OBJ_BUCH-427-001.book Page 4 Th ursday, August 30 , 2007 4:35 PM.
5 | 1 619 929 736 | (30.8.07) Bosch Power Tools 1 2 3 4 5 6 7 8 9 10 11 GBH 2-18 RE Professional OBJ_BUCH-427-001.book Page 5 Th ursday, August 30 , 2007 4:35 PM.
1 619 929 736 | (30.8.07) Bosch Power Tools 16 | English 4) Power tool use and care a) Do not force the power tool. Use the cor- rect power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de- signed.
English | 17 Bosch Power Tools 1 619 929 736 | (30.8.07) f Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. f Never use the machine with a damaged ca- ble.
1 619 929 736 | (30.8.07) Bosch Power Tools 18 | English Technical Data Noise/Vibration Information Measured values dete rmined according to EN 60745. Typically the A-weighted no ise levels of the prod- uct are: Sound pressure level 88 dB(A); Sound power level 99 dB(A).
English | 19 Bosch Power Tools 1 619 929 736 | (30.8.07) Declaration of Conformity We declare under our sole responsibility that the product described under “T echnical Data” is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until Dec.
1 619 929 736 | (30.8.07) Bosch Power Tools 20 | English Inserting the Key Type Drill Chuck (see figure D) Clean the shank end of the adapter shank and apply a light coat of grease. Insert the key type drill chuck with the adapter shank into the tool holder with a turning motion until it automatically locks.
English | 21 Bosch Power Tools 1 619 929 736 | (30.8.07) Adjusting the Drilling Depth on the Dust Extraction Attachment (see figure H) The required drilling depth X can also be adjust- ed when the dust extraction attachment is mounted. Insert the SDS-plus drilling tool to the stop into the SDS-plus tool holder 1 .
1 619 929 736 | (30.8.07) Bosch Power Tools 22 | English Safety Clutch f If the tool insert becomes caught or jammed, the drive to the drill spindle is interrupted. Because of the forces that occur, always hold the power tool firmly with both hands and provide for a secure stance.
1 619 929 736 | (30.8.07) Bosch Power Tools 118 | 1 607 000 173 2 605 438 524 2 607 000 207 2 602 025 102 1 613 001 010 1 617 000 132 SDS-plus 1 608 571 062 Ø 1,5 – 13 mm 1 607 950 045 OBJ_BUCH-427-001.
An important point after buying a device Bosch Power Tools 18/02/E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Power Tools 18/02/E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Power Tools 18/02/E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Power Tools 18/02/E you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Power Tools 18/02/E will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Power Tools 18/02/E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Power Tools 18/02/E.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Power Tools 18/02/E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Power Tools 18/02/E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
