Instruction/ maintenance manual of the product FC4100 Adaptec
Go to page of 13
2U S TORAGE E NCLOSURE Q UICK I NSTALL G UIDE FS4100, FS45 00, SC4100, AND FC4100.
1 Kit Contents ■ Adaptec Storage Enclosure (FS4100, FS4500, SC410 0, or FC4100) ■ CD, including softwar e, drivers, and documentati on ■ Tw o p o w e r c a b l e s Note: Mounting rails for rack installations are sold separatel y . See your Adaptec reseller for pur chase information.
2 Safety Tips Caution: A fully l oaded enclosure is heavy . Reduce the weight of the enclosur e by removing the drive carriers before installing the enclosure in the rack or tower . (Y ou can also remove the two APCs to further r educe the weight, if requir ed.
3 Installing into an Equipment Rac k Begin the installation by removing the components from the packaging and placing them on an a ntistatic surface until you need them.
4 3 Secure the r ear rails you selected to the rear supports of the equipment rack, using the supplied screws, as shown in the Figure in Step 1 on page 3 . 4 Secure the fr ont rails to the rear rails, as shown below . 5 T ighten al l the screws befor e continuing.
5 7 Secure the fr ont of the enclosure with one scr ew on each side, as shown in the next Figur e. The equipment rack instal lation is complete. Continue w ith Step 2: Installing the Drive Carriers on page 6 . Installing into a T ower Assembly A tower assembly is also referred to as a deskside assembly or pedestal.
6 3 Remove the tower ’s front bezel, as shown below , saving the screws for use in Step 5 . 4 T urn the enclosure 90° so that the right hand rack mount ear and LEDs ar e on top, then slide the Storage Enclosure into the tower skin, as shown above. 5 Replace the front bezel, using the scr ews r emoved in Step 3 .
7 2 W ith the cam lever of the drive sl ot fully open, slide the carrier into the slot until the lever starts to close. 3 Push the cam lever until it engages the latch on the left side of the carrier asse mbly and clicks into place. 4 Repeat for all drive carriers.
8 Connecting SA T A Cables The FS4100 and FS4500 St orage Enclosures have removable Small Form-factor Pluggable (SFP ) connectors that support copper or optical cables.
9 Connecting FC Cables The FC4100 Storage Enclosure has r emovable Small Form-factor Pluggable (SFP) connectors that support copper or optical cables. Ensur e that you have the appropriate SFP instal led for your cables.
10 Connecting Ultra320 SCSI Cables See the Adaptec 2U Storage Enclosur e In stallation and User ’ s Guide on the CD for supported cable lengths and additional cabling information. Caution: Use only Ultra320 certified cables. Ultra160 certified cables are not supported by the Adaptec SC4100 Storage Enclosure.
11 Step 5: Connecting P o wer Cords to the APC Modules. Connect one of the supplied power cor ds to each of the APC modules and to a grounded power outlet. Caution: Always use a regulating uninterrupti ble power supply (UPS) to protect your Storage Enclosure.
R Adaptec, Inc. 691 South Milpitas Boulevard Milpitas, CA 95035 USA ©2004 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are trademarks of Adaptec, Inc. which may be registered in some jurisdictio ns. Part Number: MAN-40 0 0-QUIK, Re v .
An important point after buying a device Adaptec FC4100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Adaptec FC4100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Adaptec FC4100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Adaptec FC4100 you will learn all the available features of the product, as well as information on its operation. The information that you get Adaptec FC4100 will certainly help you make a decision on the purchase.
If you already are a holder of Adaptec FC4100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Adaptec FC4100.
However, one of the most important roles played by the user manual is to help in solving problems with Adaptec FC4100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Adaptec FC4100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
