Instruction/ maintenance manual of the product W14P Bosch Appliances
Go to page of 8
6 720 607 526 ZA (05.02) JS Installation and Operating Instructions W1 1 ..P ... W1 4..P ... W1 8..P ... With piezo ignition and double safety system consisting of flue gas monitor and heat exchanger t emperat ure sensor . Gas Inst ant aneous W at er Heat er Safety instructions: If you smell gas: - Do not operate any electrical switches.
2 6 720 607 526 2.5 Gas connection ................................................................. 5 2.6 Flue ....................................................................................... 5 2. 7 Comissioning ...............................
3 6 720 607 526 1 .4 Dimensions Fig. 2 Fig. 3 1 . Front cover 2. Hole for fixing to wall 3. Observation window 4. T emperature control 5. Output control 6. Gas connection 7 . Exhaust pipe union 8. Draught diverter with flue gas monitor 9. Heat exchanger 1 0.
4 6 720 607 526 1 .6 T echnic al charact erist ics * H i 1 5°C - 1 0 1 3 mbar - dr y : Natural gas 34.2 MJ/m 3 (9.5 kWh/m 3 ) LP G : But ane 45. 7 MJ /kg ( 1 2.
5 6 720 607 526 2. Preconditions for installation The appliance can only be sold in the countries mentioned in the type plate. 2. 1 Regulations Any local by-laws and regulations pertaining to installation and use of gas-heated appliances must be observed.
6 6 720 607 526 3. Operation and maintenance Sealed parts must not be interfered with. 3. 1 Function This water heater is fitted with piezo ignition that provides for easy commissioning. In first place it must dislocate the output control of the off position to the ignition position (see fig.
7 6 720 607 526 3.7 T roubleshoot ing Inst allation , ser vicing and repairs may only be carried out by an approved engineer . The following table illustrates only a few solutions to straightforward problems. The operations marked with “*” may only be carried out by an approved technician Problem C ause Solution Pilot flame stay alight.
T urn on all gas and wat er t aps Purge air from pipes Output Control: Fig. 5 4. Operation Depress slide control knob and hold it in Ignition: output decrease output increase Press the piezo igniter R.
An important point after buying a device Bosch Appliances W14P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances W14P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances W14P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances W14P you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances W14P will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances W14P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances W14P.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances W14P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances W14P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
