Instruction/ maintenance manual of the product NKT 72 Bosch Appliances
Go to page of 12
@ BOSCH INSTALLATION INSTRUCTION MANUAL for Bosch Electric Built-in Ceramic Cook-top Models NKT 72 and NKT 92 MANUEL D'INSTALLATION Surface de cuisson _lectrique en €_r.amique encastr_e ModUles NKT 72 et NKT 92 BEFORE YOU BEGIN, READ THESE INSTRUCTIONS "COM- PLETELY AND CAREFULLY.
Table of Contents 3 Introduction Tools You Will Need power 'Requirements Counter Preparation Steps for Installation Technical Data Preparing the Location for 30" Cook-Top for 36" Cook-T.
Introduction Please read these instructions COMPLETELY AND CAREFULLY. They will save you time and effort and help to ensure optimum cook-top performance. Be sure to observe all WARNINGS. These installation instructions are intended for use by a qualified installer.
Technical Data NKT 72 series, (30", 4 element) Dimensions, NK'F 72 a Height 4" 102 mm b Width 30" 762 mm c Depth 20U2" 521 mm a • Electrical Rating, NKT 72 Volts Hertz Amper.
Preparing the Location for 30", four Element Cook-Top 30"(762mm) rain cabinet width above cooktop depth For minimum cJearences see note* Lower cabinet depth: Openin >25 (635 ram) for combination with _- / .
Preparing the Location for 36", five Element Cook-Top 36"(914mm) min cabinet width above ccoktop 35-1/4"(895mm) width 13"(330mm)max upper cabinet depth For minimum clearenoes see note" Lower cabinet depth: >25"(635 mm) for combination with downdraft fan.
Attaching Fastening Rails used for both NKT 72 and NKT 92 series 90* To attach the fastening rails: I. Mark the center as shown in drawing. 2. Align rails using notch. 3. Secure the rails tightly using screws. Note: a. The top flange of rail must sit tightly against the counter top.
Placing the Cook-Top 1. Thread the cable through the cutout opening. 2. Gently place the cook-top into the cutout, taking care to assure that cable does not become pinched between the cook-top and the counter cutout, and press in place so that cook-top interlocks with rails.
Electrical Supply Before installing the cook-top have a qualified electrician verify that your home is provided with adequate electrical service and that the addition of the cook-top will not overload the branch circuit on which it is to be installed.
J t -i Electrical Connections This appliance is manufactured with a green and yellow striped GROUND wire connected to the cook-top chassis. After making sure that the power has been turned off connect the flexible conduit from the cook-top to the junction box using a U.
Final Check List To prevent improper connection leading to damage of electrical components and so voiding the warranty, the following steps must be performed: 1. Check the electrical requirements and make sure you have the correct electrical supply and that the cook-top is properly grounded.
Schematic Wiring Diagrams NKT 72 series (7 _rM i r"- * -- i ---:-] NKT 92 series _431 N2_ _ t4_ t_ B te I i I i__iii I -,l!' _, _ .L__ __1 _ 12.
An important point after buying a device Bosch Appliances NKT 72 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances NKT 72 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances NKT 72 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances NKT 72 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances NKT 72 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances NKT 72, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances NKT 72.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances NKT 72. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances NKT 72 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
