Instruction/ maintenance manual of the product MIC400AL Bosch Appliances
Go to page of 78
Bosch Security Systems MIC400 PTZ Camera Series EN Installation and Operation Manual.
MIC400 PTZ Camera Series Installation and Operation Ma nual For the MIC 400AL, MIC400UL , MIC400ST, MIC4 00UT, MIC400PA and MIC400IR PTZ came ra models Chapters_____ ________________ _______________ ___________ 1. Introduction 2. Hardware Installation 3.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 3 Bosch S ecurit y System s Issu e 1 Introduction.............. .............................. ................. 1-12 MIC400 PTZ Camera................. ............... .............. .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 4 Bosch S ecurit y System s Issu e 1 POT Test Controls……………………………………… …………………. 4-47 POT Test Results………………………………………………………….
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 5 Bosch S ecurit y System s Issu e 1 IMPORTANT SAFETY INST RUCTIONS 1. Read these instructions 2. Keep these instruc tions 3. Heed all warnings 4. Fo llow all instruct ions 5. Install accord ing to manufactur er’s instructio ns 6.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 6 Bosch S ecurit y System s Issu e 1 Referenc e Glossary of Terms PTZ - Pan/Tilt/Zoom Bi-phase - Bosch Bi-phase telemetr y protocol (.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 7 Bosch S ecurit y System s Issu e 1 MIC400 Camera Versions and Options MIC400 Camera Versions This manual covers the installa tion &.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 8 Bosch S ecurit y System s Issu e 1 Other option s include the f ollowing:- Wiper A rubber wi per blade mounted on a spring loade d .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 9 Bosch S ecurit y System s Issu e 1 Unpacking • Check the exterior of the packa ging for visible da mage. If any items appear to have been dam aged in transit pl ease i nform the shippin g compan y.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 10 Bosch S ecurit y System s Issu e 1 Installation Environment The MIC400 range has been designed to be easily installed o n a variety of common fi ttings.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 11 Bosch S ecurit y System s Issu e 1 Key to MIC-PMB drawing 1. Securing bo lts for MIC-SCA 2. 90 mm stain less ste el pole ban ding 3. Pole m ount bracke t blocks 4. Pole m ount bracke t plate 5.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 12 Bosch S ecurit y System s Issu e 1 Associated Equipment & Typical In stallations The robust nature of the MIC400 range of came.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 13 Bosch S ecurit y System s Issu e 1 Earthing of the MIC400 camera 1. The ca mera module & hou sing are electrica lly isolated so the housing should be safety earthed regardless.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 14 Bosch S ecurit y System s Issu e 1 Electrical Connections A purpose built composite cable fo r use with the camera is availab le; .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 15 Bosch S ecurit y System s Issu e 1 PCB Earth Link The PCB has o ne link opt ion nex t to HD1 to allow the power suppl y to be s et up for different earthing schemes: The Earth Link shou ld be broken if there is a separate conne ction be tween vide o screen and earth.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 16 Bosch S ecurit y System s Issu e 1 Table C - Composite cable t o Power Supply HD-3 Connection Table Composite Cable Wire Colour Function Terminal Bo x Connector Terminal box ID marking Red AC suppl y HD3-1 Power Green AC supply rtn.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 17 Bosch S ecurit y System s Issu e 1 Table F – Fuse Ratings for MIC-240PSU, MIC-24PSU and MIC-115PSU Installation Ins tructions 1.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 18 Bosch S ecurit y System s Issu e 1 MIC-12PSU Power Supply Unit The power supply prov ides power for a single MIC400 non-ir ca mera unit from a 9v DC to 2 9v DC source for ins tallation of the MIC4 00 camera on vehicle mounted applicat ions.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 19 Bosch S ecurit y System s Issu e 1 Optional Ca rds and Kits for Non-IR MIC400 Cameras The MI C400 h as sever al option al car ds and kits as de scribed earl ier. Please refer to the respective manuals for detai ls on thei r installation and operation.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 20 Bosch S ecurit y System s Issu e 1 3. Break the two sold er links and trim away excess so lder. 4. So lder the links from t he left hand pads to t he middle pad s as shown next. 5. T he power s upply wi ll now deli ver +15v ac to HD6.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 21 Bosch S ecurit y System s Issu e 1 MIC400IR Power Supply Units MIC-IR-240PSU, MIC-I R-115PSU, MIC-IR-24PSU and MIC-I R-12PSU The p.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 22 Bosch S ecurit y System s Issu e 1 There are 5 fuses fitted to t he power supply . All are 20mm fuses. With the following fu nctions: Table I – Fuse Ratings for MIC-IR-240PSU Fuse Function Type Rating FS1 15v AC secondary fu se.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 23 Bosch S ecurit y System s Issu e 1 Table J - Alarm Input header for MIC-IR Power Supplies HD2 Connection Func tion HD2 pin 1 A lar.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 24 Bosch S ecurit y System s Issu e 1 10. A washer driv e is provid ed on this pow er supply, a mains rated relay is fitted and pre-w.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 25 Bosch S ecurit y System s Issu e 1 Power Supply layout and connections The MIC-IR-12PSU power supply PCB ha s the following connec.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 26 Bosch S ecurit y System s Issu e 1 Installation Ins tructions To install t he MIC-IR-12P SU plea se do the fo llowing:- 1.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 27 Bosch S ecurit y System s Issu e 1 16. L ED 5 illum inates when the IR su pply is select ed to on by the camer a telemetry. 17. LED 6 Pulses on/off when the MIC40 0 camera is correctly c onfigured to operate with t he I R power supply.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 28 Bosch S ecurit y System s Issu e 1 The connections can be tested by select ing the DETECT button in Camset and checking to see if the window below this butto n displays the address and software version No of the camera being tested.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 29 Bosch S ecurit y System s Issu e 1 Connecting the MIC- USB485CVTR, USB to RS485 Converter The MIC-USB485CVTR is a USB to RS485 sig.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 30 Bosch S ecurit y System s Issu e 1 MIC-USB485CVTR and Universal Camset Software Install ation Universal Camset co mes with WHQL certif ied drivers for t he MIC-USB485CVTR that must be installed pri or to connectin g the converter to th e PC.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 31 Bosch S ecurit y System s Issu e 1 Boot Messages The large square text box in th is area will display boot messages coming from the MIC. One of the first lines contains the MIC address which is d ecoded and entered into the Address line.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 32 Bosch S ecurit y System s Issu e 1 New Baud Rate This drop down list w ill provide the valid baud rates for the chosen protocol. The baud rate options reflect the protocol as se t on the main form f or Camset itself.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 33 Bosch S ecurit y System s Issu e 1 Reset Ca mset This re -initialises all of the controls for th e s oftware to the s tate it w ould be on boot.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 34 Bosch S ecurit y System s Issu e 1 Au xili ari es Slow Z oom : Reduce s the spee d at whi ch the MIC z ooms. PTZ Scale : S cales the MIC s peed depe ndant on zoom p osition. Wiper : Turns on or of f the MIC wiper i f fitted.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 35 Bosch S ecurit y System s Issu e 1 Tour Controls Tours provide a way of making a MIC continually mo ve to points of interest within its visible range.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 36 Bosch S ecurit y System s Issu e 1 MIC Setups The MIC Se tups tab contains the basic camera controls such as Genera l Settings, Multi alarms (i f MIC-ALM card is fi tted), Relays, Aut oHome op tions an d the De fault Settings.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 37 Bosch S ecurit y System s Issu e 1 Was h Wi pe If Wash Wi pe is On then, wh en the Wash auxiliary i s set the MI C will return to a preset Wash Position activ ate the washer re lay in the PSU and turn on the wi per.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 38 Bosch S ecurit y System s Issu e 1 Other controls Learn W ash Po sition This is the position that the MIC will return to when the Washer Auxili ary is activated and Wash Wipe is turned on.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 39 Bosch S ecurit y System s Issu e 1 Save Current MIC Settings This option w ill first prompt for a file l ocation and then store th.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 40 Bosch S ecurit y System s Issu e 1 The re -arm time is a time in s econds befo re the MIC returns to its cur rent positio n and returns the relay to its prio r state. The options for this are 1, 5, 10 or 60 secon ds.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 41 Bosch S ecurit y System s Issu e 1 Privacy Controls Masks On / O ff This is an override setting to turn masks completely On or Off .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 42 Bosch S ecurit y System s Issu e 1 Privacy Calibratio n The Privacy Ca libratio n secti on deal s with the cal ibrati on setting s of th e privac y masking. I.e. h ow the masks trac k as the MIC is m oved in Pan, T ilt or Zoom.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 43 Bosch S ecurit y System s Issu e 1 Whatever captio n is being set the writing mu st be entered into the Captio n Text Box . The capt ion will b e display ed in block cap itals and only certain ext ra characters are recognised.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 44 Bosch S ecurit y System s Issu e 1 Advanced Se ttings The Adv anced Setting s tab o ffers eng ineerin g and sp ecial au xiliar y contro l modes for Pelco and Pana sonic protocols (see Help file for details).
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 45 Bosch S ecurit y System s Issu e 1 EEPROM Copier This feature can be used to download the comp lete EEPROM block from the MIC to a file and then upload it to anot her.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 46 Bosch S ecurit y System s Issu e 1 Menu Contr ols (Pan asonic O nly) Matrix Controls The options here provid e controls for a Forward Visio n Matrix.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 47 Bosch S ecurit y System s Issu e 1 Pot Test Contro ls Start This ini tiates the Pot Test pr ocess. Conti nual comman ds will be sent re questing the MICs current data, the responses will b e decoded and data printed and plotted on the dis play.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 48 Bosch S ecurit y System s Issu e 1 Comms The Comms tab enables the user to mo nitor the communications to and from a MIC or any other serial device connecte d to the open comm port.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 49 Bosch S ecurit y System s Issu e 1 For ex ample a complete Learn Pre set 1 comm and in FV protoc ol is: 0A 30 31 30 41 36 4D 3 0 3.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 50 Bosch S ecurit y System s Issu e 1 Sony S et The Sony set tab shows the controls requ ired for Creating, Loading, Saving, Uploadi ng and D ownloading SonySet ta bles in FV protocol on ly.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 51 Bosch S ecurit y System s Issu e 1 Execute this Prese t This will send a command to the MIC to read the comma nds from the preset numb er in Sony Set Pr eset N umber list in memory a nd send them o n to the So ny module.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 52 Bosch S ecurit y System s Issu e 1 If only a few co mmands a re utilis ed o n the list then the rest should be set to "End " which w ill display " N/A" in the option c olumn.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 53 Bosch S ecurit y System s Issu e 1 MIC Programme r The MIC programmer allows users to change the protocol of the MIC400 camera unit; y ou must h ave the pr otocol fil e (.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 54 Bosch S ecurit y System s Issu e 1 4. Check the programming co ntrols are co rrect, the defa ult settings ar e usually correct and do not typica lly require adjustment. Error checking can be enabled to en sure an error free installation but this result in l onger loading tim es.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 55 Bosch S ecurit y System s Issu e 1 CHAP TER 5 Technical S pecificat ions MIC400 AL CAMERA MODULE Image sensor 1/4" EXvi ew CC.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 56 Bosch S ecurit y System s Issu e 1 Drive unit Integral pan/ti lt motor drive Pan angle 360° continuous rotation Pan speed Up to 9 0° per second (varia ble) Tilt a ngle 320° Tilt spe ed 0.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 57 Bosch S ecurit y System s Issu e 1 MIC 400PA CAMERA MODULE AS MIC400AL TWIN SPEAKE RS Output 6W / 8 Ohms Constructi on Polyamide U.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 58 Bosch S ecurit y System s Issu e 1 MIC400 UL and MIC400 UT CAMERA MODULE AS MIC400AL OPERATIONAL* AS MIC400AL COMMUNICATION & .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 59 Bosch S ecurit y System s Issu e 1 MIC400 S CAMERA MODULE AS MIC400AL OPERATIONAL* AS MIC400AL COMMUNICATION & PROTOCOLS AS MI.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 60 Bosch S ecurit y System s Issu e 1 MIC400IR CAMERA MODULE AS MIC400AL IR ILLUMINATORS LED array High ef ficiency Surface Mount (SM.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 61 Bosch S ecurit y System s Issu e 1 Washer pump drive card Op tional, fitted in PSU Privac y board Optional, factory fit Alarm card.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 62 Bosch S ecurit y System s Issu e 1 MIC400IR Upright (90°) Orientat ion Dimension Drawings MIC400IR Plan View Dimensio n Drawings .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 63 Bosch S ecurit y System s Issu e 1 Appendices Appendix A – Protocol Preset codes PRESET CODES Pelco MULTI_ALARM_PRESET 16 // 16 .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 64 Bosch S ecurit y System s Issu e 1 AUTOFLIP_OFF_PRESET 77 WASHWIPE_ON_PRESET 78 WASHWIPE_OFF_PRESET 79 INVERTE D_P RESE T 80 UPRIG.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 65 Bosch S ecurit y System s Issu e 1 PRIVACY_CLEAR_CENTRAL 67 PRIVACY_SHOW_CURSOR 66 PRIVACY_HIDE_CURSOR 65 PRIVACY_SAVE_PARAMET ER .
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 66 Bosch S ecurit y System s Issu e 1 AUTOHO ME_SEQUENCE_PRES ET 205 AUTOHOME_OFF_PRE SET 206 MULTI_ALARM_ON_PRESET 207 MULTI_ALARM_O.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 67 Bosch S ecurit y System s Issu e 1 American Dynamics WA SHWI PE _P RE SET 52 AUTO_ALARM_GOT O_PRESET 53 MULTI_ALARM_PRESET 28 // allow up to 12 alarms now.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 68 Bosch S ecurit y System s Issu e 1 PRIVACY_SHOW_CURSOR 86 PRIVACY_HIDE_CURSOR 85 PRIVACY_SAVE_PARAMET ER 84 PRIVACY_LOAD_PARAMETER.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 69 Bosch S ecurit y System s Issu e 1 MULTI_ALARM_OFF_PRESET 44 DIGI TAL_ZOO M_DISAB LE 43 DIGITA L_ZOOM _ENA BLE 42 AUTOFLIP_ON_PRES.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 70 Bosch S ecurit y System s Issu e 1 Molynx MULTI_ALARM_PRESET 24 //defines for li mit setting p resets WASHW IPE_P RE SET 32 AUTO_A.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 71 Bosch S ecurit y System s Issu e 1 PRIVACY_SAVE_PARAMET ER 64 //224 PRIVACY_LOAD_PARAM ETER 63 //223 PRIVACY_INIT_PARAMETER 62 //2.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 72 Bosch S ecurit y System s Issu e 1 #def ine OSD_ON 60 PAN_REVERSE _ON_PRESET 59 PAN_R EVERS E_OF F_PRES ET 58 AUTO_IR_ON_PRE SET 5.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 73 Bosch S ecurit y System s Issu e 1 Bosch PRIVACY_PRESET_ST ART 100 PRIVACY_PRESET_END 114 PRIVACY_SET_WHOLE 114 PRIVACY_CLEAR_WHOL.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 74 Bosch S ecurit y System s Issu e 1 Forward V ision WA SHWI PE _P RE SET 62 AUTO_ALARM_GOT O_PRESET 63 MULTI_ALARM_PRESET 50 // allow up to 12 alarms now.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 75 Bosch S ecurit y System s Issu e 1 PRIVACY_CLEAR_WHOLE 234 PRIVACY_UNCOVER_ALL 233 PRIVACY_REPLACE_ ALL 232 PRIVACY_SHOW_STYLE 231.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 76 Bosch S ecurit y System s Issu e 1 PRIVACY_SHOW_STYLE 91 PRIVACY_HIDE_STYLE 90 PRIVACY_SET_STYLE 8 9 PRIVACY_SET_CENTRAL 88 PRIVAC.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 77 Bosch S ecurit y System s Issu e 1 CAMERA_C OMMAND_PR ESET1 240 //not used in VC L version CAMERA_COMMAND_PRESET10 250 Vico n PRIV.
MIC400 Series Camer a | Installation and Operation Manual AAA EN | 78 Bosch S ecurit y System s Issu e 1 SOFTLIM IT_TOP_L EFT_PRE SET 90 // Always lowest nu mber SOFTLIMIT_BOTTOM_RIGHT _PRESET 91 NOND.
An important point after buying a device Bosch Appliances MIC400AL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances MIC400AL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances MIC400AL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances MIC400AL you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances MIC400AL will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances MIC400AL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances MIC400AL.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances MIC400AL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances MIC400AL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
