Instruction/ maintenance manual of the product FMR-7036 Bosch Appliances
Go to page of 2
Fire Alarm Systems | FMR‑7036 Fire Annunciator Keypad FMR‑7036 Fire Annunciator Keypad www.boschsecurity.com u Compatible with FPD‑7024 Fire Alarm Control Panel u Two‑line, 16‑character LCD .
Notice Refer to the FPD‑7024 Installation Guide (P/N: F01U008458) for complete wire length calculations. Number of Keypads Up to four keypads can be used per system. Up to three keypads can be used on any single 1000 ft (305 m) run of 18 AWG (1.2 mm) wire.
An important point after buying a device Bosch Appliances FMR-7036 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances FMR-7036 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances FMR-7036 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances FMR-7036 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances FMR-7036 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances FMR-7036, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances FMR-7036.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances FMR-7036. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances FMR-7036 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
