Instruction/ maintenance manual of the product D9210B Bosch Appliances
Go to page of 28
Access Control Interface Module D9210B Operation and Installation Guide.
D9210B D9210B Operation and Installation Guide 32206G Page 2 © 2002 Bosch Security Systems.
D9210B Contents D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 3 32206G 1.0 Introduction ................................................................................................................ ....................
D9210B Contents D9210B Operation and Installation Guide 32206G Page 4 © 2002 Bosch Security Systems 5.1 LED Troubleshooting ......................................................................................................... ....................
D9210B Introduction D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 5 32206G 1.0 Int roduct ion This document assumes that you have basic security system in stallation skills such as measuring voltages, stripping wire, making proper wire connections, and checking phone lines.
D9210B Introduction D9210B Operation and Installation Guide 32206G Page 6 © 2002 Bosch Security Systems 1.3.2 Tips, Important Notes, Cautions and Warnings Throughout this document, helpful tips, important notes, caut ions and warnings will be presented for the reader to keep in mind.
D9210B D9210B Overview D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 7 32206G 2.0 D92 1 0B Overview 2.1 System Description 2.1.1 Operational Primer The D9210B is a fully supervised, addressable SDI bus device that allows access control integration for the D9412 (8 doors) and D7412 (2 doors) panels.
D9210B D9210B Overview D9210B Operation and Installation Guide 32206G Page 8 © 2002 Bosch Security Systems When the door is held open past the normal door sequence time, an extended door sequence time is initiated. This extended time extends the shunt and re-activates the buzzer.
D9210B D9210B Overview D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 9 32206G 2.2 Physical Overview • Terminal Blocks. The D9210B comes with three banks of terminal blocks for connecting the D9210B to its power source, the panel and associated readers and relays.
D9210B D9210B Overview D9210B Operation and Installation Guide 32206G Page 10 © 2002 Bosch Security Systems • Four door states: Locked, Unlocked, Secured, Fire Unlock.
D9210B D9210B Overview D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 11 32206G 2.5 Ordered Separately The D9210B Door Controller can be used with the Bosch Se curity Syst.
D9210B D9210B Overview D9210B Operation and Installation Guide 32206G Page 12 © 2002 Bosch Security Systems 2.6 Listings and Approval Information 2.6.
D9210B Installation D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 13 32206G 3.0 Inst allat ion Thank you for choosing our product.
D9210B Installation D9210B Operation and Installation Guide 32206G Page 14 © 2002 Bosch Security Systems 3.2.2 Pulling and Marking the Wires Running wire. Use Table 4 to estimate the wire bundle size for your knockouts and where to mount the D9210B. Tag your wire runs to prevent confusion during installation an d troubleshooting.
D9210B Installation D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 15 32206G Not e: NOTE: A2 4V D Cp o w e rs u p p l ym a y b eu s e df o rt h ed o o r strike if necessary . (See Figure 5) Strike and D9210B This colo r code does not matc h all rea ders.
D9210B Installation D9210B Operation and Installation Guide 32206G Page 16 © 2002 Bosch Security Systems 3.2.3 Mounting Do not install or replace a D9210B while it is conne cted to live power circuits. The D9210B should be powered down until it is ready to be tested.
D9210B Installation D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 17 32206G 3.2.5 Door Lock, Terminals 2, 3 and 4 State Description Common Input (3) For 12/24 VDC strikes, provide the input power here from the power supply.
D9210B Installation D9210B Operation and Installation Guide 32206G Page 18 © 2002 Bosch Security Systems 3.2.9 Connecting the Card Reader, Terminals 12, 14, 15, 16, 17, and 18 Description. These terminals provide connection for a standard 26-bit Wiegand reader.
D9210B Installation D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 19 32206G 3.2.10 Setting the Dipswitch and Tagging the Unit The D9412 panel supports up to eight door controllers usin g all eight address settings. The D7412 supports up to two door controllers using the first two address settings.
D9210B Installation D9210B Operation and Installation Guide 32206G Page 20 © 2002 Bosch Security Systems 3.2.11 Connecting Power and SDI, Terminals 1, 3, 5, 6, and 7 Do not connect 24 VDC or non-isolated [from the strike] 12/24 VAC of the D9210B. Reference Figure 5 for the following connections.
D9210B Installation D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 21 32206G To activate the D9210B, follow the instructions in the D9210B Program Entry Guide (P/N:32207). Use the ACCESS Program Record Sheet to match the door to the proper address and to ensu re that the door is assigned to the proper area.
D9210B Installation D9210B Operation and Installation Guide 32206G Page 22 © 2002 Bosch Security Systems Notes:.
D9210B Operation D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 23 32206G 4.0 Operat ion 4.1 Door Release Application The D9210B can be used for door release functions. When used in this configuration, the strike relay contacts must be supervised.
D9210B Operation D9210B Operation and Installation Guide 32206G Page 24 © 2002 Bosch Security Systems Notes:.
D9210B Troubleshooting D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 25 32206G 5.0 T roubleshoot ing 5.1 LED Troubleshooting Use the following reader and D9210B LED patterns to tr oubleshoot the D9210B. It is important to use the Door Control function to validate actual door states when troubleshooting.
D9210B Troubleshooting D9210B Operation and Installation Guide 32206G Page 26 © 2002 Bosch Security Systems Notes:.
D9210B Appendix A: D9210B Terminal Quick Reference and Electrical Specifications D9210B Operation and Installation Guide © 2002 Bosch Security Systems Page 27 32206G Appendix A : D92 1 0B T erminal Quick Reference and Elect ric al Specific at ions Terminal Description Electrical Specifications 1 PWR + 12 VDC power input • 8.
© 2002 Bosch Security Systems 130 Perinton Parkway, Fairport, NY 14450-9199 USA Customer Service: (800) 538-5807; Technical Support: (888) 886-6189 32206G Operation and Installation Guide 10/0 2 D921.
An important point after buying a device Bosch Appliances D9210B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances D9210B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances D9210B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances D9210B you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances D9210B will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances D9210B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances D9210B.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances D9210B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances D9210B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
