Instruction/ maintenance manual of the product 589 Acu-Rite
Go to page of 20
Instruction Manual SAVE THIS MANU AL FOR FUTURE REFERENCE. Questions? Contact Customer Suppor t at ( 8 77 ) 22 1 - 1 25 2 or visit www . AcuRite .com. CONTENTS Unpacking Instructions ................ 2 Package Contents ....................... 2 Product Registration .
2 Congratulations on your new AcuRite product. T o ensure the best possible product perfor mance, please read this manual in its entirety and retain it for future reference. Unpac king Instr uctions Remove the protective film that is applied to the LCD screen prior to using this product.
3 Features & Benets 3-in-1 SENSOR 1 . Temperature & Humidity Sensors (internal) 2. Release Lev er for Batter y Access 3. Mounting Point 4. Wind Speed Anemometer 5. Mounting Hardware Includes anchors and screws. Qty Diameter Length 4 #4 1” 1 #6 or #8 1/4” or 3/8” 6.
4 Features & Benets Display Unit 8 1 2 3 4 5 6 7 17 16 18 19 20 9 10 13 11 12 14 15 21 23 22 27 26 25 28 29 30 33 34 31 32 24.
5 DISPL AY UNIT 1 . Current Outdoor Temperature Arrow icon indicates direction temperature is trending. 2. Sensor Low Batter y Indicator 3. Average Wind Speed Average of all speeds over last 30 minutes or calibrated 30 minute inter val. 4. Backlight Butt on 5.
6 SETUP Set the A-B-C Switc h The A-B-C switch is located inside the batter y compartment. It can be set to A, B or C. However , you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize.
7 Display Unit Se tup Set the A-B-C Switc h Locate the A-B-C switch inside the batter y compartment. Set the A-B-C switch to A, B or C. Y ou must select the same letter choices for both the display unit and the sensor in order for the units to synchronize.
8 Set t he Time, Date & U nits Press the “SET” button, locat ed on the front of the displa y unit, to enter SET MODE. Once in set mode, t he preference y ou are currently setting will blink on the displa y .
9 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and perfor mance of this product. Display Unit Placement Place the display unit in a dr y area free of dirt and dust.
10 3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) of f the ground (higher is better for wind measurement) in an open area.
11 OPERATION Using The Weat her Center Learning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen.
12 Weat her Select W eather Select displays data including wind chill, dew point, heat index, as well as 24 hour change, and high/low records for outdoor/indoor temperatures, humidity and wind speed. T o change the “W eather Select” categor y shown, press the “SELECT” button on the front of the display .
13 Troubleshooting Problem Possible Solution No outdoor sensor reception no bars • Relocate the display unit and/or the 3-in-1 sensor . The units must be within 330 ft (100 m) of each other .
14 Problem Possible Solution Inaccurate temperature or humidity • Make sure both the display unit and 3-in-1 sensor are placed away from any heat sources or vents (see page 9). • Make sure both units are positioned away from moisture sources (see page 9).
15 Care & Maintenance Display Unit Car e Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation por ts regularly with a gentle puff of air . 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth.
16 FCC Information This device complies with part 15 of F CC rules. Operation is subject to the foll owing two conditions: 1- This device may NO T cause harmful interf erenc e, and 2- This device must ac cept any interf erenc e r eceived, including interf er ence that may cause undesir ed operation.
17 At AcuRite, we proudly uphold our commitment to quality technology . Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.
.
.
©Chaney Instrument Co. All rights r eserved. AcuRite is a r egistered trademark of the Chaney Instrument Co., Lake Gene va, WI 53147. All other trademarks and c opyrights are the pr operty of their respective owners. AcuRite uses pat ented technology .
An important point after buying a device Acu-Rite 589 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acu-Rite 589 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acu-Rite 589 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acu-Rite 589 you will learn all the available features of the product, as well as information on its operation. The information that you get Acu-Rite 589 will certainly help you make a decision on the purchase.
If you already are a holder of Acu-Rite 589, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acu-Rite 589.
However, one of the most important roles played by the user manual is to help in solving problems with Acu-Rite 589. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acu-Rite 589 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
