Instruction/ maintenance manual of the product 700 Bosch Appliances
Go to page of 120
Divar 700 Series Digital Hybrid HD Recorder / Digital Network HD Recorder en Installation and Operation manual.
.
Divar 700 Series Table of Cont ents | en 3 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 T able of Contents 1S a f e t y 7 1.1 Safety precautions 7 1.2 Important safety instructions 7 1.3 Important Notices 9 1.
4 en | Table of Cont ents Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.9 Keyboard connections 31 4.10 Ethernet connection(s) 32 4.11 RS485 port 32 4.12 Biphase port 33 4.13 USB connectors 35 4.
Divar 700 Series Table of Cont ents | en 5 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.1.3 Time Server 67 6.2 Video & Audio 68 6.2.1 Analog Channels 68 6.2.2 IP Channels 69 6.2.3 Bitrates tab 72 6.3 Schedule 74 6.
6 en | Table of Cont ents Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.12.1 Service 103 6.12.2 KBD 103 6.12.3 Serial ports 104 6.12.4 Licenses 105 6.12.5 Logging 105 7 Menu default values 106 7.
Divar 700 Series Saf ety | en 7 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 1S a f e t y 1.1 Safety precautions 1.2 Impor tant safety instructions Read, follow, and retain for future reference all of the following safety instructions.
8 en | Safety Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 9. Power supply cord and plug p rotection - Protect the power supp ly cord and plug from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit.
Divar 700 Series Saf ety | en 9 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 1.3 Impor tant Notice s All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical insta llation of the building.
10 en | Safety Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic-sensi tive printed circuit boards.
Divar 700 Series Saf ety | en 11 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 1.4 FCC and UL FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been test ed and foun d to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules .
12 en | Safety Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems et résoudre les problèmes d’interfér ences de radio et de télévision) .
Divar 700 Series Introduction | en 13 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2 Introduction 2.1 Digital video recorder for sur veillance applications .
14 en | Introduction Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Hybrid verions (DHR) The DHR hybrid versions have lo oping auto-terminating analog video inputs and outputs, and audio inputs and outputs.
Divar 700 Series Introduction | en 15 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2.1.5 Features The Divar 700 Series has the following features: – 8 or .
16 en | Introduction Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems – A 25-pin D-type switching and alarm connector board – A 15-pin D-ty.
Divar 700 Series Introduction | en 17 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2.3 Installation environment 2.3.1 Mounting The Divar 700 Series is supplied as a desktop unit. If desired, the unit can be rack mounted using the rack mounting kit supplied with the unit.
18 en | Quick install Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 3 Quick install To get the unit quickl y operational, make the connections describe d below and then enter the relevant data in the Quick install menu.
Divar 700 Series Quick install | en 19 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 3.2 First-time use The unit first determines if camera inputs are PAL or NTSC and selects the output mode for the monitor. If only IP cameras are connected, th e system defaults to PAL.
20 en | Quick install Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 3.3 Quick install menu The Quick install menu contains four tabs: In ternational, Network, Schedule, and Recording. Navigate through these tabs using Back and Next .
Divar 700 Series Quick install | en 21 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 3.3.2 Schedule Figure 3.
22 en | Quick install Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 3.3.3 Recording Figure 3. 4 Quick in stall me nu - Recordi ng Set the Normal recording Resolution, Quality, an d Frame rate for each pr ofile in the table.
Divar 700 Series Quick install | en 23 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 3.3.4 Network Figure 3. 5 Quick install menu - Network Fill in the settings that control the behavior of the unit with respect to a network.
24 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4 Hardware setup This chapter contains detailed in formation about the hardware in stallation and connection of external equipment to the unit.
Divar 700 Series Hard ware se tup | en 25 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.3 Hard disk installation Up to four hard disks can be in stalled in the DVR. All hard disks are accessed from the front of the unit by removing the front panel.
26 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Placing a hard disk Figure 4. 4 Placing a hard disk 1. Locate the first empty hard disk bay. It is recommended to install the disks in order from one to four, as labeled.
Divar 700 Series Hard ware se tup | en 27 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.4 Camera connections On hybrid units, co nnect cameras to the Video in connectors on the back of the unit using 75 ohm video coaxial cables with BNC connectors .
28 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.5 Audio connections (h ybrid version only) The unit supports up to 16 audi o inputs and 4 audio outputs. Connect using audio cable with RCA compatible connectors.
Divar 700 Series Hard ware se tup | en 29 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.6.2 CVBS Connect the unit to CCTV monitors using 75 ohm video coaxial cables with BNC connectors. The unit provides a 1 Vpp CVBS signal.
30 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.8 RS232 COM port connections The RS232 COM ports are used to connect a PC to th e unit for service purposes. Use a null- modem cable to connect the serial port of the PC to the unit.
Divar 700 Series Hard ware se tup | en 31 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.9 K eyboard connections The keyboard input and output co nnectors are used to connect a Bosch Intuikey keyboar d to one or more units.
32 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Ta b l e 4 . 3 Ke yboard out - RJ11 socket (KBD out) 4.10 Ethernet connection(s) The standard RJ-45 Ethernet socket is used to co nnect the unit directly to a PC, IP camera, or to a network.
Divar 700 Series Hard ware se tup | en 33 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Figure 4.15 RS485 connector Ta b l e 4 . 5 RS485 pin definition The recommended cable diameter is AWG 28-16 (0.08-1.5 mm 2 ).
34 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 4.16 Biphase por t connector and connection board Ta b l e 4 .
Divar 700 Series Hard ware se tup | en 35 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.13 USB connectors Four USB connectors are located at the rear pane l of the unit. For convenience, one USB port is located on the front of the unit to connect a mouse or memory device.
36 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 4.18 External alarm input and output connect or and connection b.
Divar 700 Series Hard ware se tup | en 37 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Ta b l e 4 . 8 External I/O - 25-pole D- type sock et 4.
38 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.16 Po wer supply Power is supplied to the unit via the IEC-style socket. For security reason s, the unit has no on/ off switch.
Divar 700 Series Operating instructions | en 39 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5 Operating instru ctions These instructions explain the purpose of the fr ont panel keys. The functions available can be limited by se tting password s.
40 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems OSD key – press to view date/time and camera information, dat.
Divar 700 Series Operating instructions | en 41 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Stop key – while in playback mode, press to return to live mode Note: IP camera numbering starts at 9 on an 8-channel hybrid model and at 17 on a 16-channel hybrid model.
42 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.3 V iewing picture s The hybrid version has two monitor outputs, A and B. The way in which these monitors display pictures depends on how the system is config ured.
Divar 700 Series Operating instructions | en 43 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Multiscreen To view different multiscreen displays on monito r A or B: 1. Press the multiscreen key. – A multiscreen display of camera pi ctures appears on the active monitor.
44 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Zoom To zoom in on a video image: 1. Press the zoom key. – The picture is enlarged by a factor of 2. 2. Use the arrow keys to select the ar ea of the picture to be displayed.
Divar 700 Series Operating instructions | en 45 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.5 Over view of the menu syst em The menu gives access to several f unctions to he lp use the unit. Access to s ome menu items is password protected.
46 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems System information The System information menu contains two submenus: – Status - opens a menu to view status information.
Divar 700 Series Operating instructions | en 47 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.6 Search Figure 5. 5 To p m e n u - S e a r c h 1. To search, enter the top menu and click Search . 2. Choose Date/time search or event or text search from the pull-down menu.
48 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.6.2 Search Events search criteria Figure 5. 7 Searc h menu - Event s –U n d e r Start time and End time , fill in date and time values to determine the time span of the search.
Divar 700 Series Operating instructions | en 49 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Smart motion search criteria Figure 5.
50 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Text search criteria Figure 5. 9 Searc h menu - T e xt data –U n d e r Start time and End time , fill in date and time values to determine the time span of the search.
Divar 700 Series Operating instructions | en 51 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Search results Figure 5.10 Search menu - Search results – The recording fitting the filt er and closest to the selecte d date and time is shown first.
52 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.7 Expor t and local playback Figure 5.11 T op menu - Expor t video The export menu is accessed from the top menu.
Divar 700 Series Operating instructions | en 53 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 – To change a video segment in the list, select it and click Change . – To remove a video segment from the list, select it and click Remove .
54 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.8 Configuration Figure 5.
Divar 700 Series Operating instructions | en 55 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Sequence Figure 5.15 Configure monitors menu - Seq uence Select the length of time a camera remains visible on screen (1 to 60 seconds) in the Sequence dwell time field.
56 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Event display Figure 5.16 Configure monitors menu - Event displa y Select the way events are disp layed on both monitor A and B.
Divar 700 Series Operating instructions | en 57 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Text display Figure 5.17 Configure monitors menu - T ext display Select the way text events are di splayed on both monitor A and B.
58 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.9 System inf ormation Figure 5.18 T op menu - Syst em information The System information menu is accessed from the top menu.
Divar 700 Series Operating instructions | en 59 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 – Earliest recording - displays date and time of the earliest (oldest) recording on disk. – Latest recording - displays date and time of the latest (newes t) recording on disk.
60 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Ta b l e 5 . 2 Po wer supply lev els Voltage level Lower limit Upper limit 12 Volt 10.8 V 13.2 V 5 Volt 4.7 V 5.3 V 3.
Divar 700 Series Operating instructions | en 61 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.9.2 Logbook The logbook menu is used to display a filtered history of system events. Logbook filter Set various filter criteria to search in a spec ified time period f or various system events.
62 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.10 Event handling Various types of events chan ge the way the unit works.
Divar 700 Series Operating instructions | en 63 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.10.2 Contact inputs If a contact input causes an alarm – Monitors A and B (hybrid versio n only) can display an array of pre-selected cameras.
64 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6 Advanced configuration Access all the parameters that are used to configure the unit vi a the configuration menu item of the top menu.
Divar 700 Series Advanced configuration | en 65 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.1 International 6.1.1 Language Figure 6. 1 Configuration menu - International - Language – Select your Language from the drop-down list.
66 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.1.2 Time/date Figure 6. 2 Configuration menu - International - Time/date – Select a Time zone from the list (daylight saving time is adjusted accordingly).
Divar 700 Series Advanced configuration | en 67 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 recordings, the clock resumes advancing at the normal pace and normal recording behaviour is resumed.
68 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.2 V ideo & Audio Use this menu to configure the video and audio inputs. On DHR 730 models tabs 1-8 are for the analog cameras.
Divar 700 Series Advanced configuration | en 69 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Control tab – Enable PTZ when a controllable camera is connected. By default, PTZ is disabled. – Select protocol and device address on PTZ bus.
70 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Manual setup Figure 6. 6 Configuration menu - V ideo & Audio - IP camera manual setup 1. Click Manual setup ..
Divar 700 Series Advanced configuration | en 71 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Auto detect Figure 6. 7 Configuration menu - V ideo & Audio - IP camera - Auto det ect Click Auto detect ... to assign a detected IP camera to the selected channel.
72 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.2.3 Bitrates tab Units with IP channels have a Bitrates tab for allocating the total available IP bandwidth to the individual cameras.
Divar 700 Series Advanced configuration | en 73 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 panel. This causes the bitrate for the camera to be lower than the value set in the recording profiles. – No Bitstream when the camera can not stream video data due to bitrate limitations.
74 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.3 Schedule 6.3.1 Setting the dynamic ch aracteristics The settings in the Sc hedule menu provide the opportunity to tap the powerful functionality of the unit.
Divar 700 Series Advanced configuration | en 75 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.3.3 Exceptions – Up to 32 exceptions can be set that override the schedule. – To add an exception, select Add .
76 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.4 Recording Use the Recording menu to configure the recording set -up for each of the six profiles. Note: The audio/video settings in a prof ile also apply to the stream used for remote live viewing.
Divar 700 Series Advanced configuration | en 77 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 –R e s o l u t i o n : – for analog cameras, set the video resolu tion to 4CIF (704 x 576/480 PAL/NTSC), 2CIF (704 x 288/240 PAL/NTSC), or CIF (3 52 x 288/240 PAL/NTSC).
78 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Note: If Event only recording has been selected under the No rmal tab, then the pre-event time also applies for contact, motion and text recordings.
Divar 700 Series Advanced configuration | en 79 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.5 Contacts Use the Contacts menu to set up alarm inputs and relay outputs. Figure 6.11 Configuration menu - Contacts 6.
80 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems – No override (default) – Follows : the profile override lasts for as long as the input is active (no override duration can be set).
Divar 700 Series Advanced configuration | en 81 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.6 Motion 6.6.1 Motion detection on analog cameras The motion detection feature is configured by selecting the tab s for each individual analog video input.
82 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Note: Tips for troublefree motion d etection: – The size of a motion area influe nces the sen sitivity in this area.
Divar 700 Series Advanced configuration | en 83 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.6.2 Motion detection on IP cameras With IP cameras there are two ways of performing motion detection: –i n t h e c a m e r a , o r – in the recorder.
84 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.7 T ext data 6.7.1 Bridge Bridges or terminals for supplyin g text data are configured here. Figure 6.14 Configuration menu - Bridge te xt data – Port : enter the port for the bridge device.
Divar 700 Series Advanced configuration | en 85 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Figure 6.15 Configuration menu - DirectIP te xt da ta DirectIP allows external systems to send text data to the Divar unit for recording with one or more cameras.
86 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.8 Event Use the Event menu to specify the desired behavior for an active contact input, detected motion, or video loss.
Divar 700 Series Advanced configuration | en 87 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.8.2 Contact The event behavior can be co nfigured for each of the 16 input contacts in turn. – Check the Enabled box if the input contact should activate an event.
88 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.8.5 Video loss The event behavior for video loss signals can be configured for each video channel in turn. – Check the Enabled box for each video channel if video loss should activate an event.
Divar 700 Series Advanced configuration | en 89 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.9 Ne twork 6.9.1 Setup - Ge neral Figure 6.17 Configuration menu - Ne twork - Setup - G eneral – Enter a unique DVR name to be used on the network.
90 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.9.2 Setup - Connection 1 Figure 6.18 Configuration men u - Network - Setup - Connection 1 Set up the network parameters for the primary Ethernet port.
Divar 700 Series Advanced configuration | en 91 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.9.3 Setup - Connection 2 Figure 6.19 Configuration menu - Ne twork - Setup - Connections Set up the network parameters fo r the secondary Ethern et port.
92 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.9.4 IP Range Figure 6.20 Configuration men u - Network - IP range – Eight IP ranges can be entered to allow access.
Divar 700 Series Advanced configuration | en 93 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.9.5 Monitor Streaming The remote monitor streaming function, which is only available on hybrid units, allows monitor output A and/or B to be streamed re motely via one or more of the analog video inputs.
94 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.9.6 SNMP Figure 6.22 Configuration menu - Network - SNMP SNMP –E n a b l e SNMP to activate SNMP. – Community - fill in the SNMP authentication string.
Divar 700 Series Advanced configuration | en 95 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Traps Figure 6.23 Configuration menu - Ne twork - SNMP - T raps Traps –E n a b l e Traps to allow traps to be sent.
96 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.10 St orage The Storage menu gives access to in formation on the hard disk(s) and iSCSI storage LUNs. Figure 6.24 Configuration menu - Storage - Disk set 6.
Divar 700 Series Advanced configuration | en 97 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 RAID 4 is active, the storage available for vide o record ing is equal to three times the size of the smallest disk in the set.
98 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 6.26 Confi guration menu - Storage - Disks - All All disks All available disks are shown in the list. – Select Internal disks to see a list of installed inte rnal disks and their capacity in gigabytes.
Divar 700 Series Advanced configuration | en 99 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2. Add the replacement drive to the active disk set in the Disks / All tab. The recorder shows a reminder that any video on the replacement drive will be lost if the drive is added to the set.
100 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.11 Users 6.11.1 General – Set a default user. This user is logged on to the unit by default on power up. 6.11.
Divar 700 Series Advanced configuration | en 101 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.11.3 Users 1 - 7 Figure 6.28 Configuration menu - Users - User 1 access rights The access rights for up to seven users can be defined with the se ven tabs.
102 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 6.29 Configuration men u - Users - User 1 control rights In the Control rights tab, set the rights for camera viewing, camera control, camera pre- positioning, and relay control.
Divar 700 Series Advanced configuration | en 103 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.12 Syst em 6.12.1 Service – Select Restore factory defaults to reset the settings in the menu system to their default value.
104 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.12.3 Serial ports Figure 6.31 Configuration menu - System - Serial ports COM port The COM port is used for service or inte gration purposes.
Divar 700 Series Advanced configuration | en 105 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.12.4 Licenses Figure 6.32 Configuration menu - System - L icenses Some optional features require a software license to be obtai ned before they are activated.
106 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 7 Menu default values The following tables list the items of the menu system of the unit.
Divar 700 Series Menu default values | en 107 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 7.2 Monitor view set tings defaults Ta b l e 7 .
108 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 7.3 Conf iguration menu defaults Ta b l e 7 .
Divar 700 Series Menu default values | en 109 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Recording Profile 1-6 1...32 Normal Recording mode Continuous Y Pre-event time 30 seconds Y Resolution 4CIF Y Video quality Medium Y Frame rate 6.
110 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Text data Bridge Reco rder TCP port 4200 N List of bridges and te.
Divar 700 Series Menu default values | en 111 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Network Setup General DVR Name Divar 700 Series N Discovery Enabl.
112 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Users General Default user Administrator Y Administrator User name Administrator Y Password Y Allow local log on Enabled NA Allow remote log on Enabled Y Auto log off Disabled Y User 1.
Divar 700 Series Menu default values | en 113 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11.
114 en | T echnical specifications Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 8 T echnical specifications The following pages give the technical specifications of the unit. 8.1 Electrical Voltage and Power Video Audio Alarm Handling Input voltage 100-240 VAC; 0.
Divar 700 Series T echnical specifications | en 115 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Control Connectors RS232 Output signals according to EIA/TIA-232-F, max input voltage ±25 V Keyboard in put Conform RS4 85 max signal voltage ±12 V, supply 11 V-12.
116 en | T echnical specifications Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Storage Display Modes 8.1.1 Mechanical 8.1.2 Environmental Hard Disks 4 front-replaceable SATA hard drives Record Rate (IPS) P AL: 400 total, config urable per camera: 25, 12.
Divar 700 Series T echnical specifications | en 117 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 8.1.3 Electromagnetic and Safety 8.1.4 Video bitrates (Kbps) fo r analog and IP SD cameras Note: The above bitrates are theoretical values.
118 en | T echnical specifications Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 8.1.6 Accessories (Optional) Keyboard KBD-Digital / Univers.
.
Bosch Security Systems Werner-von-S iemens-Ring 10 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Security Systems, 2011.
An important point after buying a device Bosch Appliances 700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances 700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances 700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances 700 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances 700 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances 700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances 700.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances 700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances 700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center