Instruction/ maintenance manual of the product 283415 Bontrager
Go to page of 13
Part Number 283415.
Race XXX Lite Road Crankset Owner's Manual.
Please read this instruction manual thoroughly before using your new Bontrager part; it contains important safety and maintenance informa- tion. Also check our web site for further information or updates.
Each Bontr ager part is intended to be used in a specic s et of c onditions. Riding a Bontr ager part in a Use Condition that is mor e stressful (higher number ) than that for which it is intended c an cause the part t o fail.
2 The drivetrain consists of the parts of the bicycle that transmit power to the rear wheel: • P edals (and toe-clip assemblies on some models) • Crankset and .
3 Correct maintenance of the crankset and other parts of the drivetrain will make the shif t system work better and pedalling smoother , and increase the life of the parts. Maintenance includes Inspection, Lubrica- tion, and Adjustment.
Even if you perform regular inspections, if you exceed the limit of strength of a given part, it may fail if overloaded. Af ter any high force load, thoroughly inspect all the parts of your bike. High force loads include crashes, but you don't have to crash to put a high force load on your bike.
This section provides information about general maintenance.
The correct instal lation of your new Bo ntrager cranks et is c ritical to your safety , so t his work sh ould be perfor med onl y by an experi enced mech anic. I f you a re not sure of your a bility to corr ectly i nstall this cran kset, h ave the cranks et inst alled b y your Bontrag er deal er .
1. Apply a thin film of bicycle grease to the entire axle, including the splines. 2. Slide the elastomer washer (A, Figure 7) and the 1.0 mm spacer (B, Figure 7) onto the axle until they touch the crank.
8 Assembly too tight • Bottom bracket shell too wide • Bottom bracket shell not f.
9 Bontrager warrants each new Bontrager component or wheelset against defects in workmanship and materials: • All Bontrager components and accessories, except consumables such as tires and inner tubes.
0.
An important point after buying a device Bontrager 283415 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bontrager 283415 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bontrager 283415 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bontrager 283415 you will learn all the available features of the product, as well as information on its operation. The information that you get Bontrager 283415 will certainly help you make a decision on the purchase.
If you already are a holder of Bontrager 283415, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bontrager 283415.
However, one of the most important roles played by the user manual is to help in solving problems with Bontrager 283415. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bontrager 283415 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center