Instruction/ maintenance manual of the product TMA812 Bogen
Go to page of 8
50 Spring Street, Ramsey , NJ 07446 USA T el. 201-934-8500 • Fax: 201-934-9832 www .bogen.com Specifications subject to change. © Copyright 2008 Bogen Communications, Inc.
TMA812 - T ilt Mount Adapter Components NYLON TIE (4) MOUNTING CHAIN HOOK WING NUTS (4) MOUNTING CHAIN HOOKS (4) #6 POLE ADAPTER SCREWS (2) POLE ADAPTERS ST A TIONARY MOUNTING BRACKET (4) #10 AXLE/ADJUST SCREWS ADJUST ABLE MOUNTING BRACKET SPEAKER MOUNTING BRACKET 8 FT .
S TAT I O N A R Y MOUNTING BRACKET POLE ADAPTERS 1 B POLE MOUNTING: ST A TIONARY MOUNTING BRACKET WA LL OR FLA T SURF ACE A) Using proper anchors* (not supplied), attach ST A TIONARY MOUNTING BRACKET to wall or flat surface. B) Skip ahead to Section 3 to continue with Speaker Adjustable Mounting Attachment Installation.
MOUNTING BRACKET ASSEMBL Y POLE NYLON TIE MOUNTING HOOKS & WING NUTS MOUNTING HOOKS & WING NUTS POLE NYLON TIE MOUNTING HOOKS & WING NUTS TOP CHAIN BOTTOM CHAIN 2 Attaching the Mounting Bracket Assembly to a Pole A) Thread NYLON TIE thru T ie Slots and around pole to TEMPORARIL Y hold the Mounting Bracket Assembly in place on pole.
SELF- ADHESIVE RUBBER DISK SPEAKER MOUNTING KNOB SPEAKER MOUNTING KNOB SPEAKER MOUNTING BRACKET ADJUST ABLE MOUNTING BRACKET 3 Attach A8 /A 12 Speaker and Speaker Mounting Bracket to the Adjustable Mo.
4 Attach Speaker Mounting Assembly to Stationary Mounting Bracket S TAT I O N A R Y MOUNTING ASSEMBL Y ADJUST ABLE MOUNTING BRACKET A8/A12 SPEAKER ASSEMBL Y FRONT TA B A) Place Speaker Mounting Assemb.
ENGAGED T ABS & CA TCH SLOTS #10 AXLE SCREW #10 ADJUST SCREW ANGLE ADJUSTMENT WINGS ADJUST ANGLE HOLES A8/A12 SPEAKER ASSEMBL Y S TAT I O N A R Y MOUNTING ASSEMBL Y 5 Speaker Assembly Angle Adjustment and Locking Procedure A) Loosely Insert 2 (#10) AXLE SCREWS to both sides of Stationary Mounting Bracket and into the Speaker Assembly Bracket.
6 Speaker Safety Cable and T ether Link Attachment Installation A) Find the SAFETY A TT ACHMENT POINT located on the rear of the A8/A12 Speaker . Using the (1/4”- 20 x 1/2”) HEX SOCKET SAFETY BOL T and the LOCK W ASHER, secure the SAFETY TETHER LINK into t h e Safety Attachment Point, vertically , as shown.
An important point after buying a device Bogen TMA812 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bogen TMA812 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bogen TMA812 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bogen TMA812 you will learn all the available features of the product, as well as information on its operation. The information that you get Bogen TMA812 will certainly help you make a decision on the purchase.
If you already are a holder of Bogen TMA812, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bogen TMA812.
However, one of the most important roles played by the user manual is to help in solving problems with Bogen TMA812. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bogen TMA812 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
