Instruction/ maintenance manual of the product RM-350D Bogen
Go to page of 11
Digital FM/AM Receiver Model RM-350D Use r ’ s Guide 54-5021-01 9609 Printed in USA.
Specifications Band Coverage . . . . . . . . . . . . AM . . . . . . . . . . . . . . . . . . . . .530 - 1620KHz FM . . . . . . . . . . . . . . . . . . . . . .87.5 - 107.9MHz T uning . . . . . . . . . . . . . . . . . . . .PLL Synthesizer Channel Indicator .
Before Y ou Begin Y our Bogen RM-350D Digital T uner/Receiver incorporates the latest in PLL digital circuitry for reliable performance for years to come. T o get the maximum benefit from your Bogen product, please read all instructional materials provided with the unit.
AM Loop Antenna The RM350D is provided with an external AM antenna for AM recep- tion. 1. Carefully pull the antenna lead from the holding notch in the antenna and unwind the lead from the loop. 2. Connect the antenna leads to the terminals marked AM ANT .
1. Unplug the unit from electrical source. 2. Remove eight (8) screws securing the unit cover to the chassis. 3. Slide cover back to remove it from chassis. 4. Locate Jumper J1 on the circuit board (right side of the unit as you look at it from front panel).
25V & 70V Connection Y ou can connect a 25 or 70V balanced or unbalanced line to the terminals marked 25V or 70V and GND. 25V line connec- tion is shown below .
T o connect zones using 25V or 70V line: Connect the impedance selector jumper to the 25V or 70V terminal. Connect the line to the desired zone terminal and COM as shown below . T ape Out Y ou can connect a tape recorder to the RM350D using the T ape Out jack.
Operation Power Press the front panel POWER switch to apply power . Adjust the volume to the appropriate level using the amplifier volume control. T o Select a Band Press the button marked BAND . The current band appears on the display: FM1, FM2, FM3, AM1 or AM2.
Microphone V olume Use the MICROPHONE control to adjust mic volume. Aux/T uner V olume The VOLUME control adjusts the output level of program from tuner and aux sources.
Maintenance CAUTION There are no user serviceable parts within the tuner . T o avoid an electric shock hazard, refer all internal servicing to qualified service personnel only . The warranty will become void if repairs are made by other than the Bogen Factory Service Center .
50 Spring Street, Ramsey , NJ 07446 (201) 934-8500 Fax: (201) 934-9832.
An important point after buying a device Bogen RM-350D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bogen RM-350D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bogen RM-350D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bogen RM-350D you will learn all the available features of the product, as well as information on its operation. The information that you get Bogen RM-350D will certainly help you make a decision on the purchase.
If you already are a holder of Bogen RM-350D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bogen RM-350D.
However, one of the most important roles played by the user manual is to help in solving problems with Bogen RM-350D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bogen RM-350D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
