Instruction/ maintenance manual of the product MPS1B Bogen
Go to page of 4
© 2010 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice. 54-2194-01A 1010 MPS1 Mini Pendant Speaker Models MPS1B / MPS1W Installation and Use Manual.
Power T ap Selection 16-ohm or 70V The Power T ap selector switch is used to set the appropriate power level or impedance for your system. Rotate the switch until the power level you require lines up with arrow . IMPORT ANT : When connecting to a 70V amplifier , make sure that the MPS1 T ap Selector switch IS NOT set in the “16Ω” position.
IMPORT ANT : The MPS1 Mini Pendant is not an outdoor speaker . DO NOT expose the speaker to rain or moisture. The MPS1 should be installed by qualified personnel. ALONG WITH THE MAIN DROP CABLE, YOU MUST ALSO USE A SAFETY CABLE WHEN SUSPENDING AN MPS1 PENDANT SPEAKER.
50 Spring Street, Ramsey , NJ 07446 USA T el. 201-934-8500 • Fax: 201-934-9832 www .bogen.com The Bogen MPS1 Mini Pendant Speaker is warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the original purchaser .
An important point after buying a device Bogen MPS1B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bogen MPS1B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bogen MPS1B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bogen MPS1B you will learn all the available features of the product, as well as information on its operation. The information that you get Bogen MPS1B will certainly help you make a decision on the purchase.
If you already are a holder of Bogen MPS1B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bogen MPS1B.
However, one of the most important roles played by the user manual is to help in solving problems with Bogen MPS1B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bogen MPS1B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
