Instruction/ maintenance manual of the product BCWBT Bogen
Go to page of 12
Bogen Enhancer Instruction Manual © 2005 Bogen Communications, Inc. All Rights Reser ved. 54-2 1 4 1 -0 1 D 0804.
Contents Intr oduction .................................................................................................................. ..................................................... 3 Using This Manual .......................................
Intr oduction The Bogen Enhancer is an infrared wir eless microphone system offering pr ofessional performance and operating featur es. Infrared transmission is used to reduce r oom-to-room interfer ence while sending a sig- nal fr om a presenter’ s micr ophone to a dual-channel r eceiv er .
System F eatur es BCWR Dual-Channel Wireless Micr ophone Receiver • Dual Receiver , Simultaneous 2-Channel Operation f or 2 T ransmitters (Ch. A, Ch.
BCWR Receiv er POWER INPUT 16V AC Connecting the Audio Output The BCWR Receiver pr ovides an unbalanced, line-lev el mix ed output to the RCA Jack (3) . This can be connected to a mix er or a P .A. system using the supplied RCA to RC A audio cable . The audio of both Channels A and B ar e mix ed together at this output.
BCIRS Infrar ed (IR) Sensors Operation The IR Sensors act as "antennae" for y our infrar ed wireless micr ophone system. A multiple ar ra y of wide-angle IR-sensitive LEDs (behind the fr ont panel receptors) r eceive the infrared signal emitted by y our IR T ransmitter .
T ransmitter Setup Slide down the Battery Compar tment Co ver ( 1 ) , as shown, exposing the batter y compar tment. Insert 2 fresh AA alkaline batter- ies or the optional BCBRBP Batter y Pack NiMH rechargeable batter- ies while obser ving the corr ect polarity as mark ed.
8 BCHM Headset Micr ophone Operation a. The BCHM is pr ovided with a 3.5mm Locking Connector ( 1 ) for connecting the microphone to the BCWBT T ransmitter . Plug in the microphone’ s connec- tor and secure the connection b y turning the metal slip ring clockwise to thread it on the jack.
T ransmitter Setup Unscre w and r emov e the Battery Compar tment Co ver ( 1 ) by sliding it down off the micr ophone to expose the batter y holder . Insert 2 fresh AA alkaline batteries or the option.
Specifications BCWR Receiver: Mode Infrared Fr equency Modulated Receiving Channels Dual-Channels A & B Carrier Fr equency Ch. A: 2.0 MHz; Ch. B: 2.6 MHz Audio Frequency Response 60 Hz- 1 2 kHz S/N Ratio > 90 dB Audio Mix Output 400 mV Range (line-of-sight) Up to 30 ft.
Limited W arranty Bogen Enhancer pr oducts (BCWR Receiver , BCWBT T ransmitter , BCLM La valiere Micr ophone , BCHM Headset Micr ophone, BCBM Body-Pack Microphone, BCIRS Infrar ed Sensors, BCY A Multi.
50 Spring St. Ramsey , N J 07446 T el: 20 1 -934-8500, Fax: 20 1 -934-9832 www .bogen.com.
An important point after buying a device Bogen BCWBT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bogen BCWBT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bogen BCWBT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bogen BCWBT you will learn all the available features of the product, as well as information on its operation. The information that you get Bogen BCWBT will certainly help you make a decision on the purchase.
If you already are a holder of Bogen BCWBT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bogen BCWBT.
However, one of the most important roles played by the user manual is to help in solving problems with Bogen BCWBT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bogen BCWBT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
