Instruction/ maintenance manual of the product RS232 ACTiSYS
Go to page of 18
The Wireless Connectivity Expert 48511 Warm Springs Blvd., Suite 206, Fremont, CA 94539, USA Tel: +1-510-490-8024 F ax: +1-510-623-7268 Web: http://www.actisys.com E-mail: irda-info@actisys.com ACT-BT5701S v2 Bluetooth RS232 Adapter Class 1 User’s Manual December 06, 2006 Version 2.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual TABLE OF CONTENT REVISION HISTORY ................................................................................................ 3 1. OVERVIEW ..........................................
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual REVISION HISTORY Revision History Revision Date Comment 0.1 03/22/2006 • Initial draft version 1.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual Copyright 2005-2006 ACTiSYS Corp. Page 4 of 18 ACTiSYS Confidential Information Dec 06, 2006 Version 2.0 1. OVERVIEW ACTiSYS Bluetooth RS232 adapter brings wireless Bluetooth technology to your RS232 serial equipment, allowing you to eliminate conventional cables.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 6. FEATURES ! Bluetooth embedded solution for RS232 cable replacement, applications such as industrial remote control devices. ! Configurable baud rate 1.2k ~1843.2k bps. ! True Plug-n-Play; no driver required.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 7.2 Null Modem Connection For Configuring Parameters Figure 2: Null Modem Connection For Configuring Parameters 7.3 Null Modem Connection For Normal Operation Figure 3: Null Modem Connection For Normal Operation Copyright 2005-2006 ACTiSYS Corp.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 8. FACTORY SETTING PARAMETERS When using ACT-BT5701S v2 with your serial devices, make sure all the settings match on both sides.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 9. CONFIGURATION PARAMETERS Figure 4: Configuration Parameters Window 9.1. UART Format • Baud Rate : 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 or 1843200 bps selectable.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual • Master or Slave Mode : User can select device as a master or a slave. If you configure it as a Master then you need to assign Slave BD address (Predefined Remote BD Address).
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual Figure 5: Null Modem Adapter Connect ACT-BT5701S v2 as shown in Figure 6. User has to take care of direction of DB9 null modem adapter. During configuring parameters, black end of null modem adapter should be connected to ACT-BT5701S v2.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual NOTE : For Normal Operation the null modem adapter must be in reverse direction. Black end should be connected to PC COM port while white end should be connected to ACT-BT5701S v2. Figure 7 shows this connection.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 10.4. Then you will see the screen below. Click Finish to complete the procedure. 10.5. Now run utility program ACT-BT5701Sv2.EXE from Start>Programs> ACTiSYS> ACT- BT5701S v2 . You will see the following screen: Figure 8: Configuration Utility 10.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual Figure 9: Read Configuration Complete Copyright 2005-2006 ACTiSYS Corp. Page 13 of 18 ACTiSYS Confidential Information Dec 06, 2006 Version 2.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 10.7. After all parameters have been set, click “ Write Configuration” button to save all the settings . See Figure 10. Figure 10: Write Configuration Progress 11. CONNECTION FOR NORMAL OPERATION For normal operation mode, the null modem adapter must be in reverse direction.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 12. LED BEHAVIOR LED CATEGORY LED BEHAVIOR STATUS On Active (Connect) Mode Flash Fast Data Transfer Mode “ACT” LED Flash Slow Stand By Mode On Power on “POWER” LED Off Power off 13.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual 13.2 Generic Specifications FUNCTION ACT-BT5701S v2 Standard Bluetooth 1.2 Interface RS232 Configurable Parameters Master or Slave mode,.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual A8. User can give power to DC JACK pin through power adaptor 7.5V @300mA or give unregulated 5 ~ 12 VDC to pin 1 of the male connector of ACT-BT5701S v2. Q9. I am not able to configure the new parameters.
The Wireless Connectivity Expert ACT-BT5701S v2 User’s Manual Copyright 2005-2006 ACTiSYS Corp. Page 18 of 18 16. CONTACT INFORMATION ACTiSYS Corporation 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: +1-510-490-8024, FAX: +1-510-623-7268 E-Mail: irda-info@actisys.
An important point after buying a device ACTiSYS RS232 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTiSYS RS232 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTiSYS RS232 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTiSYS RS232 you will learn all the available features of the product, as well as information on its operation. The information that you get ACTiSYS RS232 will certainly help you make a decision on the purchase.
If you already are a holder of ACTiSYS RS232, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTiSYS RS232.
However, one of the most important roles played by the user manual is to help in solving problems with ACTiSYS RS232. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTiSYS RS232 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
