Instruction/ maintenance manual of the product PN7520 Blue Sea Systems
Go to page of 4
Blue Sea Systems Inc. p 360.738.8230 425 Sequoia Drive f 360.734.4195 Bellingham, W A 98226 USA conductor@bluesea.com www .bluesea.com 980016790 Rev .001 W arranty GUARANTEE: Blue Sea Systems stands behind its products for as long as you own them. Find detailed information at www .
Display Indicators 1. Charging: SOLID ON (Green): Indicates Charging mode and will operate according to its charging stage. BLINKING (Green): T ransitioning from Standby to a Charging state. OFF: Standby mode - will not charge a batter y or supply current to loads.
Alerts and Diagnostics 5. Thermal Regulaton: SOLID ON (Y ellow): The charger temp output limit LED indicator will blink to notify the user that the charger is limiting its output to protect itself from e ventual overheating. The most common correction for this state is to increase the fan speed to High.
P12 Batter y Charg er Remote P12 Batter y Charger RJ45 P or t Blue Sea Systems Inc. 425 Sequoia Drive Bellingham, W A 98226 USA p 360.738.8230 f 360.734.4195 conductor@bluesea.com www .bluesea.com 980016790 Rev .001 4 of 4 Cable Connection The P12 Batter y Charger Remote uses one Cat5e cable for communication and power.
An important point after buying a device Blue Sea Systems PN7520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blue Sea Systems PN7520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blue Sea Systems PN7520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blue Sea Systems PN7520 you will learn all the available features of the product, as well as information on its operation. The information that you get Blue Sea Systems PN7520 will certainly help you make a decision on the purchase.
If you already are a holder of Blue Sea Systems PN7520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blue Sea Systems PN7520.
However, one of the most important roles played by the user manual is to help in solving problems with Blue Sea Systems PN7520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blue Sea Systems PN7520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
