Instruction/ maintenance manual of the product PN 8408 Blue Sea Systems
Go to page of 4
1. Disconnect all AC and DC power Disconnect all AC power originating on or off the vessel. This includes inverters, generators, shore power attachments and any other device capable of supplying AC power to the ship’s circuits.
DC Installation (continued) 3. Install battery bank voltage monitor wires The panel is supplied with a digital meter and switch to monitor the voltage of three separate sources, usually the batteries.
1. Apply branch circuit labels and mount panel Apply a label for each circuit from the label set provided. If the appropriate label is not included, extended label sets are available through retail suppliers, and over 500 individual labels are available directly from Blue Sea Systems.
ADDITIONAL BREAKER REQUIRED IF GREA TER THAN 10 FEET 0.5 TO 2 AMP FUSES 1 TO 2 AMP FUSE Wiring Diagram AC/DC Power Distribution Panel with AC & DC Digital Multimeters PN8408/PN3408shownforreference 9089Rev .
An important point after buying a device Blue Sea Systems PN 8408 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blue Sea Systems PN 8408 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blue Sea Systems PN 8408 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blue Sea Systems PN 8408 you will learn all the available features of the product, as well as information on its operation. The information that you get Blue Sea Systems PN 8408 will certainly help you make a decision on the purchase.
If you already are a holder of Blue Sea Systems PN 8408, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blue Sea Systems PN 8408.
However, one of the most important roles played by the user manual is to help in solving problems with Blue Sea Systems PN 8408. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blue Sea Systems PN 8408 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
