Instruction/ maintenance manual of the product ACT-IR3200M ACTiSYS
Go to page of 24
48511 Warm Sprints Blvd., Suite 206 Fremont CA 94539 Tel: (510) 490-8024 Fax: (510) 623-7268 Website: h t tp : / / www. a c t i s y s . c o m E-mail: irda-info@actisys.com ACT-IR3200M & ACT-IR3200SW FIR/MIR/SIR Tester User’s Manual Copyright 2004-2005 ACTiSYS Corporation All Rights Reserved Version 1.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert TABLE OF CONTENT 1) INSTALLATION FOR ACT -IR3200SW SO FTWARE ....................................... 4 2) UN-INSTALLATION FOR ACT-IR3200SW SOFTWARE ................................ 7 3) APPLICATION GUIDE .
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert REVISION HISTORY Revision History Revision Date Comment Rev 0.1 01/20/2005 Preliminary Design Specification for Internal Review Version 1.0 02/01/2005 Version 1.0 Released Version 1.1 04/01/2005 Modification in GUI Version 1.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 1) INSTALLATION FOR ACT-IR3200SW SOFTWARE Following is the installation instruction for ACTiSYS-IR3200SW under Windows 2000 Note: This program supports Windows 98/Me/2000/XP.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 3. Press the Browse button, if you wan the change the location. Press Next button to continue 4. Change the Program folder if required, Press Next to proceed Copyright 2004-2005 ACTiSYS Corp.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 5. Then, setup wizard will install the application and finally confirms by the following screen Copyright 2004-2005 ACTiSYS Corp.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 2) UN-INSTALLATION FOR ACT-IR3200SW SOFTWARE Following is the un-installation instruction for ACT-IR3200SW software under Windows 2000 1. Open the Control Panel and select Add/Remove Programs.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 2. Select ACTiSYS –IR3200SW and press Change/Remove 3. Select Remove Option and pres s Next to continue un-installation Copyright 2004-2005 ACTiSYS Corp. Page 8 of 24 July 12 th , 2005 Version 1.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 4. Un-install wizard get confirmation and automatically remove ACT-IR3200SW and all its components Copyright 2004-2005 ACTiSYS Corp.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 3) APPLICATION GUIDE After successfully completing the installation, now press the shortcut link in the program menu.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert INTRODUCTION IR3200SW is a user interface of the ACTi SYS Handheld Tester ACT IR3200M for writing customer test scripts and monitoring the test. It runs under Windows. IR3200M is a FIR/MIR/SIR Handheld Tester for testing IrDA devices.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert A) CONFIGURATION I) COMMUNICATION SETTINGS This option allows the user to select the Port to which the device is connected. II) CHECK DEVICE This option allows the user to check the connected device is working or not.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert V) CONFIGURING CUSTOM TEST This option allows the user to configure the Custom Test Parameters. Edit the Values and then select the Options Delete : Deletes the selected test item from the table.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert Append Script : All the user to Append the new Test Script in the Table, along with the existing Test Script.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert Factory Defaults for Custom Test Number of Test : 8 Test No Baud Rate Frame Size Pattern No of Test Frames 1 4.00 Mbps (FIR) 256 Random 4 2 1.152 Mbps (MIR) 256 Random 4 3 0.576 Mbps (MIR) 256 Random 4 4 115.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert B) TESTING I) IR DETECT TEST This option search for IR Signal in the media. If any IR signal found the progress bar in the screen will be raised. Start : To start the Test Stop : To Stop the Test Exit : To exit from this test.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert Continue : To Continue the Test Cycle III) CUSTOM TEST This option allows the user to execute t he Custom Test. System will automatically execute the Custom Test Cycle based on the Test Cycle Configuration Settings.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert C) ABOUT Gives information about the Application and other Contact Information D) QUIT Quit from the Application Copyright 2004-2005 ACTiSYS Corp. Page 18 of 24 July 12 th , 2005 Version 1.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 5) TEST SCRIPT AND PARAMETERS • Speed Data transfer speed, supports SIR (9600, 19.2K, 38.4K, 57.6K, 115.2K), MIR (0.576M,1.152M) and FIR (4M). • Frame size of the test frame, 64, 128, 256, 512, 1024, or 2048 bytes.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 6) THE MEANING OF TEST RESULTS AND ERROR CODES Test Result Error Code Remark Pass 0x00 No error. Frame truncated 0x01 XIR, SNRM, RR, and TEST successful. But the Test response(s) received is (are) truncated.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 9) BER TEST FFS (Far Field Source), NFS (Near Field Source) test. A) PRESCRIPTION: • The device under test (DUT) can be either a Primary or a Secondary Station. But during the test, the DUT always plays the Secondary role.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert b) Irradiance = 4 µW/cm ² using source 27mW/Sr at 82cm to test 115.2K & below B) TEST ITEMS: Use the calibrated IrDA Reference Testers and IrLAP-Test Frame to test the DUT. This test focuses on the receiver's strong intensity tolerance and w eak signal sense capability.
ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 10) WARRANTY INFORMATION ACTiSYS Corporation warrants to the first consumer purchaser, for a period of 1 year from the date of purchase, t.
Copyright 2004-2005 ACTiSYS Corp. Page 24 of 24 July 12 th , 2005 Version 1.2 ACT-IR3200SW User’s Manual The Wireless Connectivity Expert 11) CONTACT INFORMATION ACTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 263-7268 E-Mail: irda-info@actisys.
An important point after buying a device ACTiSYS ACT-IR3200M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTiSYS ACT-IR3200M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTiSYS ACT-IR3200M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTiSYS ACT-IR3200M you will learn all the available features of the product, as well as information on its operation. The information that you get ACTiSYS ACT-IR3200M will certainly help you make a decision on the purchase.
If you already are a holder of ACTiSYS ACT-IR3200M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTiSYS ACT-IR3200M.
However, one of the most important roles played by the user manual is to help in solving problems with ACTiSYS ACT-IR3200M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTiSYS ACT-IR3200M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
