Instruction/ maintenance manual of the product ACT-IR100M+ ACTiSYS
Go to page of 17
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M+/100M/100MP IrDA Printer Adapter User’s Manual □ IR-100M ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)Thi.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IMPORTANT – COMPATIBILITY We appreciate all of our honorable users of this product will read this com patibility list carefully.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TABLE OF CONTENTS INTRODUCTION ................................................................................................................... .................................... 5 PARTS CHECK LIST .
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP INTRODUCTION The ACT-IR100M+ is the only Two-in-One IrDA parallel printer adapter that allows a mobile device to print directly via infrared. A mobile device user can print out via infrared port and he can also print out via parallel port from desktop PC.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 1 : ACT-IR100M+ ACT-IR100MB LED Indicator DB36 DB36 LED Indicator ACT-IR220L+ DB9 DB9 IR Port AC Adapter ACT-IR100M+ LED Status Definition Name Status Meanings Off Before Detecting IR Device Blink Slowly IR Signal Detected LED On IR Communicating Release 3.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M AC Adapter LED Indicator IR Port DB36 DB36 IR Head Figure 2 : ACT-IR100M ACT-IR100M LEDs Definition Name Status Meanings Power LED (red) On Power on Parallel LED (green) On or Blink fast Printing through the infrared port Infrared LED (green) Blink Stand-by for transmission Release 3.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 3: ACT-IR100MP ACT-IR100MP LED Status Definition Name Status Meanings Off Before Detecting IR Device Blink Slowly IR Signal Detected LED On IR Communicating Figure 3 : ACT-IR100MP ACT-IR100MP LED Indicator DB3 IR Head Release 3.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP P ARTS CHECK LIST When you unpack the package, the following items should be found. IR100M IR100MB IR100M+ IR100MP Print Adaptor ◎ ◎ ◎ ◎ Flo.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP SETUP IR100M/IR100M+ DB25F Printer Port CEN36F Port IR Head Figure 4: Connection Diagram with Passing Thru IR100MP CEN36F Port IR Head Figure 5: Connection Diagram without Passing Thru Release 3.2, December 9, 2003 10 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IR100M/IR100M+ IR Head 30 ° Maximum 100cm IR Port 30 ° Figure 6. Align Diagram Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through function) 1. Turn Off both your computer and printer.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 14. Align your mobile device infrared eye wi th IR100M+/IR100M/IR100MP IR Head (see figure 3). The LED on IR100M+/IR100MP will flash slowly. Or the Infrared LED on the top of IR100M will flash. 15. Choose Print , the LED on IR100M+/IR100MP will be on and printer begin to print out.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TROUBLE SHOOTING AND COMP A TIBLE PRINTERS LIST For help on general and miscellaneous problems you may be ex periencing with your printing, refer to the following pages for possible solutions. Look up your problem and try the solution.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M Trouble Shooting Table IF your IR100M version is v2.2 or below, you MUST follow the power sequence. Problem Solution The power LED is not on. 1 Be sure there is 110V AC power suppl y to your wall outlet.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP SPECIFICA TIONS Model: ACT-IR100M+/100M/100MP Carrier: Infrared radiation (peak wavelength: 850 to 1050 nm) IrDA SIR Transmission Speed: 9.6, 19.2, 38.4, 57.6, 115.2K bps Parity Bit: None Data: 8 bit Stop Bit: 1 bit Error Check: CRC Parallel Interface: Centronics 36F/36M Cable to Parallel Printer.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP W ARRANTY INFOMA TION THE FOLLOWING WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Release 3.2, December 9, 2003 17 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved CONT ACT INFORMA TION ACTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.
An important point after buying a device ACTiSYS ACT-IR100M+ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTiSYS ACT-IR100M+ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTiSYS ACT-IR100M+ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTiSYS ACT-IR100M+ you will learn all the available features of the product, as well as information on its operation. The information that you get ACTiSYS ACT-IR100M+ will certainly help you make a decision on the purchase.
If you already are a holder of ACTiSYS ACT-IR100M+, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTiSYS ACT-IR100M+.
However, one of the most important roles played by the user manual is to help in solving problems with ACTiSYS ACT-IR100M+. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTiSYS ACT-IR100M+ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
