Instruction/ maintenance manual of the product KTT-DS Blodgett
Go to page of 8
1 KTT-DS Series DIRECT STEAM TABLE TOP TILTING KETTLE INSTALLATION – OPERATION – MAINTENANCE BLODGETT OVEN COMPANY www.blodgett.com 44 Lakeside Avenue, Burlington, Vermont 05 401 USA Telephone (80.
2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
3 TABLE OF CONTENTS DESCRIPTION PAGE 1.0 Service Connections ............................................................................................................ 4 2.0 Introduction ..............................................................
4 1.0 SERVICE CONNECTIONS P J K L POUR P A TH F H N M C O D B R S E G Q DIMENSIONS ARE IN INCHES [MM]. S R 7.5 DIMENSIONS MODEL KTT -6DS KTT -10DS KTT -12DS CAPACITY 6 gallons 23 litres 38 litres 10 gallons 46 litres 12 gallons UNITS inches inches inches mm mm mm 14.
5 2.0 INTRODUCTION DESCRIPTION All direct connected steam jacketed kettles pertaining to this manual are direct steam operated pressure vessels of a double-wall stainless steel construction forming a steam chamber (jacket) enveloping the lower two thirds of the kettle bowl surface.
6 3.0 INSTALLATION INSTRUCTIONS 1. These kettles must be installed on a suitable table or counter top. 2. On counter top make 7/8" holes at 13 - 3/4" centers for kettle legs on Models KTT-6DS, KTT-10DS, KTT-12DS and 12, 23-1/2" centers on Model KTT-20DS.
7 4.0 OPERATING PROCEDURES CAUTION: THE APPLIANCE A ND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICI NG THE APPLIANCE. 1. Fill kettle with product to desired level. 2. Slowly turn the steam control valve ON to full open position. 3. The water or food should boil 3 - 4 minutes per gallon.
8 5.0 CLEANING PROCEDURES Your kettle should be cleaned immediately after each use. 1. Ensure that steam supply is OFF. 2. Pre-rinse inside of kettle thoroughly and tilt to remove any food particles. 3. Using a nylon brush, clean kettle with a mild detergent and warm water rinse.
An important point after buying a device Blodgett KTT-DS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blodgett KTT-DS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blodgett KTT-DS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blodgett KTT-DS you will learn all the available features of the product, as well as information on its operation. The information that you get Blodgett KTT-DS will certainly help you make a decision on the purchase.
If you already are a holder of Blodgett KTT-DS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blodgett KTT-DS.
However, one of the most important roles played by the user manual is to help in solving problems with Blodgett KTT-DS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blodgett KTT-DS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
