Instruction/ maintenance manual of the product KLT-DS Blodgett
Go to page of 12
1 KLT-DS and KPT-DS Series DIRECT STEAM TRI-LEG TILTING KETTLE AND DIRECT STEAM PEDESTAL TILTING KETTLE INSTALLATION – OPERATION – MAINTENANCE BLODGETT OVEN COMPANY www.
2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
3 TABLE OF CONTENTS DESCRIPTION PAGE INSTALLATION AND SERVICE CONNECTIONS – KLT-DS ............................................ 4 INSTALLATION AND SERVICE CONNECTIONS – KPT-DS ............................................ 5 1.0 INSTALLATION INSTRUCTIONS .
4 SERVICE CONNECTIONS – KLT-DS FLANGED FOOT DETAIL 4 7/16" [1 1 mm] HOLES ON 3 [76] B.C. EQUALL Y SP A CED Ø DIMENSIONS ARE IN INCHES [MM] S KL T -30DS KL T -60DS KL T -20DS KL T -100DS KL T -80DS B C D E K 70° SPRING ASSISTED COVER - OPTIONAL JACKET DRAIN V AL VE 31.
5 SERVICE CONNECTIONS – KPT-DS V IEW A-A 4X Ø7/16 [1 1] EQ. SP ACED ON 16.62 [422] B.C. (20 TO 60 GALLONS) ON 19.62 [498] B.C. (80 GALLONS) S 4 5 ° SAFETY RELIEF V AL VE STEAM TRAP AND STRAINER (OPTIONAL) Ø A 4 [102] 7.38 [187] K H F AUCET (OPTIONAL) 2"or 3" T ANGENT DRA W OFF V AL VE (OPTIONAL) 6.
6 1.0 INSTALLATION INSTRUCTIONS 1. Select a location to provide drainage for kettle pour path when tilted and for draw-off valve if so equipped. 2. Mark hole locations through flanged adjustable feet on KLT-DS models and through pedestal base on KPT-DS models.
7 INTRODUCTION 2.0 DESCRIPTION All Blodgett direct connected steam jacketed kettles pertain ing to this manual are direct steam operated pressure vessels of a double-wall stainl ess steel construction forming a steam chamber (jacket) enveloping the lower two thirds of the kettle bowl surface.
8 4.0 OPERATING INSTRUCTIONS 1. If kettle has draw-off valve, close it. 2. Fill kettle with product to desired level. 3. Slowly turn the steam control valve ON to full open position (counter clockwise). 4. The water or food should boil 2 to 3 gallons per minute.
9 DRAW-OFF VALVE CLEANI NG 1. If equipped with a tangent draw-off valve, turn the large hex nut on the draw-off valve counterclockwise until it is completely dis engaged from the threads. Grasp the valve knob and slowly pull out the valve stem. Wash t he valve stem, disk and handle.
10 2. If the stain resists removal, additional exposure time with vinegar may be required, to a maximum of one hour. 3. Thoroughly wash all of the vinegar away with fresh clear water. Dry the surface completely and allow one hour before using the appliance to cook.
11 6.0 TROUBLESHOOTING MAINTENANCE 6.1 PREVENTIVE MAINTENANCE No preventive maintenance is required other than adhering to the Cleaning Procedure instructions. 6.2 DRAW-OFF VALVE LEAKS If a leak occurs through the valve steam, replace the “O” ring.
12 that there is water in the jacket. Open ball valve and drain. Close valve and commence operation of kettle..
An important point after buying a device Blodgett KLT-DS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blodgett KLT-DS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blodgett KLT-DS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blodgett KLT-DS you will learn all the available features of the product, as well as information on its operation. The information that you get Blodgett KLT-DS will certainly help you make a decision on the purchase.
If you already are a holder of Blodgett KLT-DS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blodgett KLT-DS.
However, one of the most important roles played by the user manual is to help in solving problems with Blodgett KLT-DS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blodgett KLT-DS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
