Instruction/ maintenance manual of the product KLT-40G Blodgett
Go to page of 17
PARTS LIST GAS TILTING KETTLES MODELS: KLT-20G KLT-40G KLT-60G April 6, 2007 BLODGETT OVEN CO ▪ 44 lakeside Ave ▪ Burlington, VT 05446 Tel. 800-331-5842 ▪ Fax 802-86 0-3732 ▪ www.
.
FIGURE 1 ITEM Part Number DESCRIPTION QUANTITY 1 40955 Pilot Light - Green 24V 1 2 42175 Instruction Label 1 3 40795 Low Water Control Mounting Bracket 1 ** 4 40466 Probe, 9 ¼” (20 Gallon) 1 40467 .
FIGURE 1 ITEM Part Number DESCRIPTION QUANTITY * ** 24 40251 Combustion Chamber (20 Gallon) 1 40252 Combustion Chamber (30, 40 Gallon) 1 40253 Combustion Chamber (60 Gallon) 1 25 40033 Recessed Contro.
KLT-20, TILTING MECHANISM.
KLT - 20, TILTING MECHANISM FIGURE 2 ITEM Part Number DESCRIPTION QUANTITY 1 41554 Handwheel 1 2 40101 Set Screw 1 3 41235 Tilt Shaft 1 4 40367 Bushing 2 5 41095 Segment Gear and Worm Gear Kit (Includ.
KLT 20, 40, 60, TILT CONSOLE AND PARTS FIGURE 3.
FIGURE 3 ITEM Part Number DESCRIPTION QUANTITY ** 1 43396 Console Cover 1 * 40621 Console Cover Assembly (Faucet Mount), OPTIONAL. 1 * 40496 Spacer (Faucet Mount), OPTIONAL.
FIGURE 3 ITEM Part Number DESCRIPTION QUANTITY 26 43402 Truss HD Phillips Drive, 10 - 32 x 1-1/4 2 27 43403 RD HD Slot Drive Screws 8 - 32 x 1/4 3 28 43404 External Tooth Washer # 8 3 29 43405 Pin 1 3.
FIGURE 4.
FIGURE 4 ITEM Part Number DESCRIPTION 20 30 40 60 ** 1 42589 Complete Burner Assembly, Natural Gas 1 42592 Complete Burner Assembly, LP Gas 1 42588 Complete Burner Assembly, Natural Gas 1 42591 Comple.
FIGURE 4 ITEM Part Number DESCRIPTION 20 30 40 60 23 40169 Trunnion Housing Assembly 1 1 1 * ** 24 40242 Console Cover 1 1 1 40243 Console Cover - Hinge Mount 1 1 1 25 40167 Console Nozzle Assembly 1 1 1 26 40168 Nozzle Cover 1 1 1 27 42547 Gas Supply Pipe Assembly 1 1 1 28 42594 Hex Bushing, 1/2 x 3/4 2 2 2 * NOT SHOWN.
FIGURE 5 SPRING ASSIST HINGE ASSEMBLY.
FIGURE 5 SPRING ASSIST HINGE ASSEMBLY ITEM Part Number DESCRIPTION QUANTITY 42112 HINGE ASSEMBLY 1 41543 Lock Pin 1 2 41546 End Lock Plate 1 3 43106 Stationary Disc 1 4 41100 Core 1 5 41526 Spring 1 *.
FIGURE 7 DRAW-OFF VALVE.
FIGURE 7 ITEM Part Number DESCRIPTION QUANTITY 40553 1 -1/2" DRAW-OFF VALVE ASSEMBLY 1 41809 Acorn Nut 10-24 UNC 1 2 40662 Handle, Stainless Steel 1 3 40560 Bonnet 1 4 40559 Gland Nut 1 5 40562 .
3 40570 Bonnet 1 4 40569 Gland Nut 1 5 40572 “O” Ring 1 6 40571 Stem Assembly 1 7 43248 Valve Body 1.
An important point after buying a device Blodgett KLT-40G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blodgett KLT-40G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blodgett KLT-40G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blodgett KLT-40G you will learn all the available features of the product, as well as information on its operation. The information that you get Blodgett KLT-40G will certainly help you make a decision on the purchase.
If you already are a holder of Blodgett KLT-40G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blodgett KLT-40G.
However, one of the most important roles played by the user manual is to help in solving problems with Blodgett KLT-40G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blodgett KLT-40G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
