Instruction/ maintenance manual of the product BZE-10A Blitz Audio
Go to page of 12
BZE-10A Half–DIN 10 Band Slide Control Pre-Amp Equalizer with Subwoofer Boost Control user’s manual.
Thank you for purchasing the Blitz Graphic Equalizer . Rest assured you have purchased a quality product designed and engineered to give YOU many years un-compromised musical ser vice. The Blitz Graphic Equalizer has been designed using the latest in electronic technology available today .
table of contents precautions general features 2 3 features and specifications 4-5 mounting and installation 6 system wiring 7-8 troubleshooting 9.
· 10 Band Graphic Equalizer · Rotar y Subwoofer Boost Control with Active Electronic Adjustable Crossover · Rotar y Fader Control · Full Night Illumination · Compact 1/2 DIN Chassis Size · Front.
3 Precautions Never drive with the volume raised so high you cannot hear what is occurring in traffic around you, Be aware that repeated exposure to excessive volume levels can permanently damage your hearing! Keep all electronics away from moisture, dust, extreme heat or extreme vibrations.
4 features and specifications 10 0 10 30 Hz 60 Hz 120 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 16 kHz F DVD DEF PWR R Fader MIN MAX Subwoofer SUB FRONT LR LR 80 120 160 Hz REAR LR LINE INPUT LR.
5 featur es and specifications Source voltage Load impedance Reference voltage Input impedance Control frequencies Subwoofer frequency crossover points Filter roll off Control range Frequency response Signal to noise ratio Input sensitivity for 200mV output Power requirement Dimensions (WDH) 14.
6 Mounting and installation The BZE10A is a Half DIN sized unit. It can be mounted in the dashboard with your head unit in most cases. Use of an auxiliary installation kit is needed like those made by American international or Scoche products.
7 System wiring Diagram A for RCA input configuration If your radio does not have RCA output jacks as in the case of most standard OEM radios you can use the speaker outputs from those head units to power the BZE10A by interfacing them with a high/low level impedance adaptor like the Pyramid Model NS60 or any of the other numerous models available.
8 System wiring Diagram C for sample amplifier installations Diagram D for wiring directions Diagram C Diagram D.
9 Troubleshooting Signal processor does not turn on. PROBLEM POSSIBLE CAUSE • Remote turn-on wire has 12V . • 12V wire has 12V • Ground wire is properly connected Level of sound is low . Background noise is too high. • Wiring is not loose or cables misconnected/disconnected • RCA cables are not faulty .
All Blitz products are carefully constructed and thoroughly tested before shipment. Products purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchase.
An important point after buying a device Blitz Audio BZE-10A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blitz Audio BZE-10A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blitz Audio BZE-10A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blitz Audio BZE-10A you will learn all the available features of the product, as well as information on its operation. The information that you get Blitz Audio BZE-10A will certainly help you make a decision on the purchase.
If you already are a holder of Blitz Audio BZE-10A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blitz Audio BZE-10A.
However, one of the most important roles played by the user manual is to help in solving problems with Blitz Audio BZE-10A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blitz Audio BZE-10A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
