Instruction/ maintenance manual of the product A3-31E-BHMV Blendtec
Go to page of 11
Instruction Manual ™.
T able of Contents SECTION P AGE # SECTION 1: IMPORT ANT SAFEGUARDS 1 SECTION 2: UNP ACKING 3 SECTION 3: CONNOISSEUR OVERVIEW 4 SECTION 4: INST ALLA TION 6 SECTION 5: CARE AND CLEANING 10 SECTION 6: O.
CN-1 SECTION 1 IMPORT ANT INFORMA TION Read all instructions carefully before using your Connoisseur™ 1.1 SAFETY CERTIFICA TION The blender is certied by ETL (Report No.
CN-2 CN-3 1.8 NEVER OPERA TE THE BLENDER USING A TT ACHMENTS NOT SOLD BY BLENDTEC The use of any unauthorized attachments may cause re, electric shock, and/or injury and will void the warranty . 1.9 CONT AINER MUST BE PROPERL Y IN PLACE WHILE APPLIANCE IS OPERA TING 1.
CN-4 CN-5 SECTION 3 Connoisseur Overview (Refer to Figures 1 and 2) 3.1 BLENDER MOTOR • Blender base housing: houses the power unit in a surgical stainless steel cas- ing. Never remove the blender base cover . Removal of the cover will void the warranty .
CN-6 CN-7 16 /” 6 /” 8 ¼” SECTION 4 INST ALLA TION It is recommended that surge protection be placed between the receptacle and the blender motor . 4.1 CONNOISSEUR ABOVE COUNTER INST ALLA TION 1. Place motor into base unit. 2. Place blender on a at, clean and dry surface.
CN-8 CN-9 4.2 CONNOISSEUR IN-COUNTER INST ALLA TION Preparation 1. Identify desired blender location. Consider preferences such as proximity to ingredients, available counter space, and access to a power source. (A licensed electrician may need to install appropriate power source for the blender .
CN-10 CN-1 1 SECTION 5 CARE AND CLEANING 5.1 AFTER USE CLEANING 1. Add 1 cup of hot water and a drop of liquid dishwashing soap to the blender jar . 2. Place the lid tightly onto the jar . Place the blender jar on the blender base, and with your hand placed on top of the lid; press the pulse button for 5 seconds.
CN-12 CN-13 SECTION 7 TROUBLESHOOTING 7.1 BLENDER MOTOR WILL NOT TURN ON If the blender motor will not turn on, try the following: • Make sure the main power switch on the front panel is turned ON. • Check your house circuit breaker switch or fuse to make sure it is set to the ON position.
CN-14 CN-15 SECTION 8 W ARRANTY W ARRANTY DESCRIPTION (US Domestic and Canada) Y our Blendtec Connoisseur motor is warrented for 5 years. The jar assembly , including all moving jar parts, is covered against leaking or breakage for 1 year . The blender jar blade and the motor base drive socket are covered by a lifetime warranty .
1206 South 1680 West Orem, UT 84058 801-222-0888 blendtec.com MKT -RE-MN-091 Blendtec Home Connoisseur Manual Rev . 02 June 2006 ©2006 K-TEC, Inc., All Rights Reserved Blendtec is a registered trademark of K-TEC, Inc.
An important point after buying a device Blendtec A3-31E-BHMV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blendtec A3-31E-BHMV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blendtec A3-31E-BHMV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blendtec A3-31E-BHMV you will learn all the available features of the product, as well as information on its operation. The information that you get Blendtec A3-31E-BHMV will certainly help you make a decision on the purchase.
If you already are a holder of Blendtec A3-31E-BHMV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blendtec A3-31E-BHMV.
However, one of the most important roles played by the user manual is to help in solving problems with Blendtec A3-31E-BHMV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blendtec A3-31E-BHMV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
