Instruction/ maintenance manual of the product MDR220A Black Box
Go to page of 10
MDR220A Wireless V.90 Modem User’s Manual Version 1.0 1000 Park Drive – Lawrence, PA 15055-1018 – (724)746-5500 Web site: www.blackbox.com E-mail: info@blackbox.
Document & FCC Information Copyright © 2004 Black Box All rights reserved.The Copyright information contained in this manual and the accompanying Information software programs are copyrighted and.
Table of Contents Users Manual ……………………………….……… 1 1. Overview………………………………………..…… 4 1.1 MDR220A & MDR221A Definitions………… 4 2. Windows Modem Setup & Configuration……… 4 3.
MDR220A User's Manual 1 Overview The MDR220A & MDR221A products provide a wireless point-to-point connection between a RS232 device and a 56K data/fax modem. 1.1 MDR220A & MDR221A Definitions 1) Pwr: Red LED indicates power is connected to the unit.
MDR220A User's Manual 2) If the Standard 56000 bps K56Flex Modem is not installed, click Add … to install a new modem. 3) Select Other when asked what type of modem you want to install, then click on Next> . 4) Select “Don’t detect my modem; I will select it from a list” .
MDR220A User's Manual 5) Select “(Standard Modem Types)” from the Manufacturers list, then select “Standard 56000 bps K56Flex Modem” from the Models list. Click Next> to continue. 6) Select the port to use with the modem and click Next> to continue.
MDR220A User's Manual 8) You are now ready to configure the new modem. Select “Standard 56000 bps K56Flex Modem” and then click Properties . 9) On the General tab, select the port that is connected to the MDR221A unit. Select 115200 for the Maximum speed.
MDR220A User's Manual 10) Click the Connection tab. Select 8 Data bits, None for Parity, 1 for Stop bits. Select “Wait for dial tone before dialing” . Selecting “Cancel the call if not connected within xx secs” is optional. 11) Click Advanced … to continue.
MDR220A User's Manual 3 Auto-Answer Feature 9 This feature enables the MDR220A unit to answer an incoming call over the phone line. In order to enable this feature, the HyperTerminal program must be opened. HyperTerminal is launched by clicking on the Start icon in Windows and selecting Programs.
MDR220A User's Manual 4 Connecting To A Non-PC Device When using MDR220A to connect a non-PC device to a phone line, it is important that the MDR221A unit is configured properly. The MDR221A unit must match the serial settings of the non-PC host device.
An important point after buying a device Black Box MDR220A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black Box MDR220A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black Box MDR220A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black Box MDR220A you will learn all the available features of the product, as well as information on its operation. The information that you get Black Box MDR220A will certainly help you make a decision on the purchase.
If you already are a holder of Black Box MDR220A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black Box MDR220A.
However, one of the most important roles played by the user manual is to help in solving problems with Black Box MDR220A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black Box MDR220A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
