Instruction/ maintenance manual of the product EXP-06E ACS
Go to page of 15
Access Control System EXP-06E Single Door Access Contr oller Installation and Operation Instructions V ersion 6.6 Revision 2003-5.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 2 1. INTRODUCTION The ACS Access Control System is a powerful software based time recording, access control and integrated security system designed to meet the most demanding access control and point monitoring applications.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 3 2. Hardwar e Requir ements Computer : CPU: Pentium III 800MHz Hard disk space: 500MB RAM: 64MB OS: W i.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 4 3. EXP-06E Access Contr oller Configuration I/O Capacities IN Reader ----------------------------- 1 I.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 5 4. CONFIGURAR TION DIAGRAM Entry Exit A A B C A B EXP- 06E A A D Auxiliary Rela y Output Ala rm Rela y.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 6 6. User Card Operation Pr ocedures 6.1 Present Card Only Place the card on the present card area. If the entrance is permitted, the proximity card reader will sound a long "beep".
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 7 proximity card reader will sound three sort " beep-beep-b eep". For security reason, the key Operation can only be tried 3 times. Af ter than the Key Operation will be terminated for this card only .
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 8 Otherwise, the proximity card reader will sound three sort "beep-b eep-beep" for rejected active by "INV ALID AUTHORIZE LEVEL" OR "W RONG PIN CODE".
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 9 7. INST ALLA TION OF EXP-06E 7.1 Overview of EXP-06E The EXP-06E has two-reader port and one keypad port, capable of handling three relay outputs. The EXP-06E is housed in a 16 A WG metal wall-mounted cabinet.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 10 7.3 Equipment Wiring /r equir ement of EXP-06E 7.3.1 Readers (In/Out) & Keypad 1. Do NOT wiring with any other high power cable. E.g. 220V AC 2. Do NOT ins tall near switches that produce large am ount of spark.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 11 7.4 Connecting the EXP-06E to a host The connector – G, H, I connects a single EXP-06E to the host computer via RS-232C format. Multiple EXP-06E communicates with host from connector – F , E via RS-485 format.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 12 7.4.4 Configuring the RS-485 Interface Card RS-485 Interface Card is used to communi cate PC and EXP-06E via RS-485 form at. Make sure there are no other devices usi ng COM3 and I/O address (03E8-03EF) in t h e P C b e f o r e installation .
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 13 7.7. Configure Alarm Relay The alarm relay can be activated at the following events: 1. Break In Alarm This is used to enable the break in signal of door .
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 14 8. Specification 8.1 EXP-06E Access Controller CPU : 8031 M e m o r y : 3 2 K B Clock & Data Memo.
EXP-06E Access Control System Installation Instruction Satcom Systems (International) Co., Ltd. 15 Model : SFLA -030-2L Switching Power Suppl y DC1 + 12V( 2A) DC2 - 12V ( 1A) AC-L DC2 AC-N COM DC1 FG Connected to EXP-06 Control ler Board 12V A (+) 12V B (-) 12V O utput f or Electr ic Lock (2 am p.
An important point after buying a device ACS EXP-06E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACS EXP-06E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACS EXP-06E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACS EXP-06E you will learn all the available features of the product, as well as information on its operation. The information that you get ACS EXP-06E will certainly help you make a decision on the purchase.
If you already are a holder of ACS EXP-06E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACS EXP-06E.
However, one of the most important roles played by the user manual is to help in solving problems with ACS EXP-06E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACS EXP-06E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
