Instruction/ maintenance manual of the product LMC7006A Black Box
Go to page of 4
8 1 10/100 Autosensing Media Converter Installation Guide LMC7001A-R4 – LMC7002A-R4 – LMC7003A-R4 – LMC7004A-R4 – LMC7005A – LMC7006A 10/100 Autosensing Media Converter ™ is a low- cost, standalone, IEEE 802.
2 7 Configuration Instructions 10/100 Autosensing Media Converters features an 8-position DIP switch for configuring the unit. This switch is accessed through a cut-out in the bottom of the unit. After configuring the switch, power down the unit and then power up again for the DIP switch changes to take effect.
•I n Force 100 mode , the media converter converts 100Base- TX to 100Base- SX multi-mode or 100Base-FX single -mode fiber; 10 Mbps signals are not accepted. There is no auto-negotiation in Force-100 mode. T o enable Force-100 mode, set switch S7 to the ON position, with switches S6 and S8 in the OFF position.
4 5 L INK F AULT D ETECTION F EATURE Link F ault Detection is only available when using Force-10 or Force-100 mode; it is not available in Auto-Negotiation mode. When LFD is enabled and the input link is down at one interface to the 10/100 Autosensing Media Converter , the transmitter output on that interface is turned off for about 425ms every 3.
An important point after buying a device Black Box LMC7006A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black Box LMC7006A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black Box LMC7006A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black Box LMC7006A you will learn all the available features of the product, as well as information on its operation. The information that you get Black Box LMC7006A will certainly help you make a decision on the purchase.
If you already are a holder of Black Box LMC7006A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black Box LMC7006A.
However, one of the most important roles played by the user manual is to help in solving problems with Black Box LMC7006A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black Box LMC7006A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
