Instruction/ maintenance manual of the product LMC5000A Black Box
Go to page of 9
1 Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: info@blackbox.com © 2005. All rights reserved. Black Box Corporation. 6/15/2005 #24435 Chassis available with or without SNMP embedded.
2 eliminating the need to install a separate management module or software in your system. Just add your media converter module(s) and, for greater control, a Band- width Manager module. The 1-port model (LMC5101A) holds one media converter module and is powered by an autosensing 115-/240-VAC power supply.
3 The LGC5109C-R2, the Plus SC model, supports distances up to 10 kilometers (6.2 mi.) over single- mode fiber. LGC5844C–LGC5847C These 1.25-Gbps modules use WDM to send bidirectional signals over a single strand of single-mode fiber.
4 convert to 1300-nm multimode and support up to 8 kilometers (5 mi.) when operating at full-duplex. Use a pair of these converters at opposite ends of the same fiber optic link to increase your fiber reach.
5 Traditional fiber optic media converters require two strands of fiber to send transmit and receive signals. Single-strand fiber conversion, however, enables you double your fiber utilization by compressing the transmit and receive wavelengths into one single-mode fiber strand.
6 Ordering Information ITEM CODE Choose the chassis for your application… High-Density Media Converter System 2-Slot Desktop ............................................................................................................................
7 Ordering Information ITEM CODE Fast Ethernet, Layer 1, 1-Strand T ransmit/Receive Individual Modules T wisted Pair/Single-Strand FX Single-Mode, SC, 20 km 1310-nm T ransmit/1550-nm Receive.............................................................
8 Ordering Information ITEM CODE AT M 155 (OC3) T wisted Pair/Multimode SC, 20 km ..............................................................................................................................LMC5006C T wisted Pair/Single-Mode Plus SC, 40 km .
9 Ordering Information ITEM CODE T1/E1/J1 Modules T wisted Pair (RJ-48)/1300-nm Multimode ST , 2 km ........................................................................................................LME001A T wisted Pair (RJ-48)/1300-nm Multimode SC, 2 km .
An important point after buying a device Black Box LMC5000A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black Box LMC5000A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black Box LMC5000A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black Box LMC5000A you will learn all the available features of the product, as well as information on its operation. The information that you get Black Box LMC5000A will certainly help you make a decision on the purchase.
If you already are a holder of Black Box LMC5000A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black Box LMC5000A.
However, one of the most important roles played by the user manual is to help in solving problems with Black Box LMC5000A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black Box LMC5000A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
