Instruction/ maintenance manual of the product AP2750 3Com
Go to page of 8
Quick Start Guide AP2750 Managed Access Point 3CRWX275075A The 3Com AP2750 Managed Access Point provides IEEE 802.11a or 802 .11b/g wireless access to the network. The access point is designed for us e with a 3Com W ireless LAN Switch, and r equires hardware installation only .
3Com AP2750 Managed Access Point Featur es Feature Description Power Port The access point can be powe red either via Power Over Ethernet (PoE), or by an external power supply (not included) that is plugged into the Power Port. Serial Port The serial port is not su pported.
Observing Safety Pr ecautions This equipment must be installed in compliance with local and national bui lding codes, regulatory restrictions, and FCC rules. For th e safety of people and equipment, only professional ne twork personnel should install the access point.
3 Attaching the Antennas Carefully unpack the standard deta chable antennas. Screw the antenn as on to the antenna connectors on the access point and hand-tighten them. After network star tup, you may need to adjust the ant ennas to fine-tune coverage in your area.
4 Mounting the Access Point The access point can be mounted on the following types of surfaces: • W all, ceiling, or electr ical box (NEMA enclosure) •T a b l e t o p . W all, Ceiling, or Electrical Box Mounting T o mount the access point to a wa ll, ceiling, or electrical box: 1 Remove the access point from the mounting bracket.
The figures below show the m ounting bracket be ing mounted to a wall, and then a cable being routed thr ough the large opening on the back of the mounting bracket. 4 Connect the Ether net cable (and p ower cable, if applicable) to the port(s) on the front of the access point.
T abletop Mounting T o install the access point on a flat surfa ce such as a ta ble or desktop: 1 Remove the backing from the four rubber feet and attach th em on the bottom of the mounting bracket that is attached to the access point. 2 Place the access point on the table.
Copyright © 200 6 3Com Corporat ion. All rig hts reserved. 3Com an d the 3Com log o are registered trademarks of 3Com Co rporation . All other company and pr oduct name s may be tr ademarks of the respective compan ies with which they are associated.
An important point after buying a device 3Com AP2750 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com AP2750 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com AP2750 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com AP2750 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com AP2750 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com AP2750, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com AP2750.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com AP2750. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com AP2750 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
