Instruction/ maintenance manual of the product MTB500 Black & Decker
Go to page of 2
INSTRUCCIONES DE SEGURIDAD IMPORT ANTES MISES EN GARDE IMPORT ANT SAFEGUARDS Cuando se utilizan aparatos eléctricos, siempre se debe respetar ciertas medidas de seguridad, incluyendo las siguientes: ■ Por favor lea todas las instrucciones.
How to Use Care and Cleaning Blender Jar Assembly 1. Before first use, wash all parts except the Unit Base. The Jar , Blade Assembly , Gasket and Collar are already assembled into the Jar Base. Disassemble to wash. Once all pieces have been cleaned, reassemble.
An important point after buying a device Black & Decker MTB500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker MTB500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker MTB500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker MTB500 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker MTB500 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker MTB500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker MTB500.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker MTB500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker MTB500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
