Instruction/ maintenance manual of the product KS1300-QS Black & Decker
Go to page of 16
P o werful Solutions TM www .blackanddecker .co.uk KS1300 KS1301.
2 English (Original instructions) 5.
3.
4.
5 Intended use Y our Black & Decker saw has been designed for sawing wood and wood products. This tool is intended for consumer use only . Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions.
6 f. Keep cut ting too ls s harp and cle an. Prop erly mai ntai ned cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
7 Safety instructions for circular saws with outer or inner pendulum guards and with tow guard a. Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly . Never clamp or tie the lower guard into the open position.
8 Electrical safety # This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. u If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
9 Adjusting the bevel angle (g. F) This tool can be set to bevel angles between 0° and 45°. u Loosen the locking knob (19) to unlock the saw shoe. u Move the saw shoe (8) into the desired position. The corresponding bevel angle can be read from the scale (24).
10 Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life.
11 T o claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. Y ou can check the location of your nearest authorised repair agent by contacting your local Black & Decker ofce at the address indicated in this manual.
12.
13.
14.
ENGLISH Do not forget to register your product! www.blackanddecker .co.uk/productregistration Register your product online at www.blackanddecker .co.uk/productregistration or send your name, surname and product code to Black & Decker in your country .
Australia Black & Decker (Australia) Pty . Ltd. T el. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker T el. +64 9 259 1 133 5 T e Apunga Place Fax +64 9 259 1 122 Mt Wellington Auckland 1060 United Kingdom Black & Decker T el.
An important point after buying a device Black & Decker KS1300-QS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker KS1300-QS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker KS1300-QS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker KS1300-QS you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker KS1300-QS will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker KS1300-QS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker KS1300-QS.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker KS1300-QS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker KS1300-QS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
