Instruction/ maintenance manual of the product GT320 Black & Decker
Go to page of 2
Quick Start Guide Models GT300, GT305, GT320 PREP ARING UNIT FOR FIRST USE 1. Remove the water reservoir from the back of the unit (A). 2. Remove reservoir lid and fill reservoir with water to the 7 oz., 9 oz. & creamy line. Do not overfill. 3. Press the OPEN lid release lever to unlock the lid (B).
Mise en route rapide Modèles GT300, GT305, GT320 PREP ARA TIFS 1. Retirer le réservoir de l'arrière de l'appareil (A). 2. Retirer le couvercle du réservoir et remplir celui-ci jusqu'à la mar que de 218 ml (7 oz), 281 ml (9 oz) ou de café crémeux (CREAMY).
An important point after buying a device Black & Decker GT320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker GT320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker GT320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker GT320 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker GT320 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker GT320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker GT320.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker GT320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker GT320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
